FS-2008 DHG Bullitt, 7300 miles, garage kept, never raced or beaten.
Asking $35K, located in Clarksville, MD.
FR 4.6 3 Aluminator SB (9.8:1cr)
FR Heads
Comp Stage II Cams
Whipple HO SC
Whipple 10 rib kit
JPC Whipple Plenum/Intake
JPC CAI tube
L&M 72mm TB
80lb Injectors
GT500 Fuel pumps
Moroso Tanks
ARH LT's ceramic coated, gutted cats, stock muffler
Saleen gauge pod with FR guages
MGW 5spd shifter, stock knob
G Force clutch
JPC Clutch line
DS Aluminum 1pc drive shaft, stock 3.73 gears
FR 18x9.5 wheels-Nitto 285/40/18 front, 305/40/18 rear
Brembo front brakes, 14" front rotors, Hawk pads, SS brake lines all 4
FR3 Suspension with 1.5" lowering srings
BMR lower contol arms
Fays Watts link
MM caster camber plates and bumpsteer kit
Tuned by JPC
All OEM/Stock parts (engine, wheels,tire, brakes,strut brace etc) boxed and goes with the car. Approx 3K miles on the stock parts. Also have a FR proto type Strut brace that will work with the stock Whipple plenum and TB
Asking $35K, located in Clarksville, MD.
FR 4.6 3 Aluminator SB (9.8:1cr)
FR Heads
Comp Stage II Cams
Whipple HO SC
Whipple 10 rib kit
JPC Whipple Plenum/Intake
JPC CAI tube
L&M 72mm TB
80lb Injectors
GT500 Fuel pumps
Moroso Tanks
ARH LT's ceramic coated, gutted cats, stock muffler
Saleen gauge pod with FR guages
MGW 5spd shifter, stock knob
G Force clutch
JPC Clutch line
DS Aluminum 1pc drive shaft, stock 3.73 gears
FR 18x9.5 wheels-Nitto 285/40/18 front, 305/40/18 rear
Brembo front brakes, 14" front rotors, Hawk pads, SS brake lines all 4
FR3 Suspension with 1.5" lowering srings
BMR lower contol arms
Fays Watts link
MM caster camber plates and bumpsteer kit
Tuned by JPC
All OEM/Stock parts (engine, wheels,tire, brakes,strut brace etc) boxed and goes with the car. Approx 3K miles on the stock parts. Also have a FR proto type Strut brace that will work with the stock Whipple plenum and TB
Last edited:
epper:
