20x12's? What tire will fit that?

[Scotts Elle]

How wide of a tire will work with that? Who makes a 20" tire with a decent sized sidewall?

 

[Taunto]

im not to sure to be honest.. but if u dont mind me asking......what wheels are u lookin at.. thats a wide fricken rim lol

 

[Scotts Elle]

This with a deep dish:

Or this:

Front will be 20x9 and rear 20x12 if I can find a tire that fits

 

[I'D WIN]

You will need a 345/20 or 25. Your tires will be limited and more than likely very expensive.

A lot of the Corvette guys run 345's and they spend upwards near 500-600+ per tire.

http://www.discounttire.com/dtcs/searchTiresBySize.do?r=NVLINT&cs=345&ar=&rd=20

http://www.tirerack.com/tires/Compa...e&pagelen=20&pagenum=1&pagemark=1&RunFlat=All

Nitto makes the Invo's but they seem to very difficult to come across.

http://www.nittotire.com/#index.tire.invo

It will look badass though!

 

[Cichlids]

I keep telling you Scott for the amount you will be into those rims you could use some Asanti's that are just sitting around oke: and if they get curbed there are many more to select from for me

 

[UncleAnt]

almost 2g's for tires is crazy.it would look badass but youll never want to drive for fear of messing up those tires

 

[02SILVERBULLET]

29x15/20 mickey thompson sr's they say 13" is min rim with but i think it would be ok on a 12"

315/35-20 also about the correct size

 

[02_lightning_NP]

29x15/20 mickey thompson sr's they say 13" is min rim with but i think it would be ok on a 12"

315/35-20 also about the correct size

who makes a 20" rim thats 13" wide, thats ridiculous.

 

[dino lord]

who makes a 20" rim thats 13" wide, thats ridiculous.

street rods. you'd be surprised how many are on eeeeeaaarly ford coupes and such.

 

[lightningonbags]

That what I was going to suggest was the s/r sportsman by MT. I only thought of that cuz I might have a little plan for my own truck!:rolling:

 

[ACSVT]

HRE's? $$$$$$$$$$$$$$$$$$$$$$$$$$$

 

[SADF]

Gawd I want some True Forged! Eventually I want to do some TF's 22" with a huge lip. I just want the Sprortmans to be made in a 22" or any brand of tire to make a drag 22" like the newer Nitto 20" drag radial.

 

[mc01svt]

315/35z/20 would be the perfect size. You have a choice between Toyo, Michelin, Yokohuma and Dunlop I think.......

 

[FordFanStan]

29x15/20 mickey thompson sr's they say 13" is min rim with but i think it would be ok on a 12"

315/35-20 also about the correct size

315/35z/20 would be the perfect size. You have a choice between Toyo, Michelin, Yokohuma and Dunlop I think.......

Although the SR's would probably look the baddest, I think these two are right about the 315/35r20. You'd be saving alot of money with the available options probably. In fact I think this is the size that comes on the productions X3s from Beemer.

Haven't talked to you in a while, did you want to get some more datalogs to us bud? FFS

 

[pitstain]

Scott I run 315/35-20 Michelin Diamaris on my 20x11's and they would also be perfect on a 12" wide rim, they are also within 1% of the stock tire O.D. and the perfect front pairing would be 275/40-20, this combination is the OEM tire package used on the HI-PO BWM X5 4.8is and also the Prosche Cayanne GTS, or Turbo S.

 

[FordFanStan]

Those are the SUVs I was thinking of. X3 X5 ahh whats the diff lol. Good info Ian. FFS