• Welcome to SVTPerformance!

3.73 or 4.10 gears?

Discussion in 'SN-95 and New Edge Mustangs' started by sexystang1994, Jan 10, 2002.

  1. sexystang1994

    sexystang1994 5.0 Slut Established Member

    Messages:
    21
    Joined:
    Jan 10, 2002
    Location:
    Daytona Beach, Florida
    I am new at this ........ but i need an opinion.
    What is better for an automatic 94 mustang GT?? 3.73 gears or 4.10? thanks
    jessi
     
  2. 10secL

    10secL New Member Established Member

    Messages:
    185
    Joined:
    Jan 19, 2001
    Location:
    Southern USA
    3.73s......unless you own a gas station......LOL.........Chip is on the way...........I will talk to Jim tomorrow.......see if i can get it custom programmed for you!!!!!!!! Lata Sweetie!!!!!:smmon:
     
  3. Brian K

    Brian K New Member Established Member

    Messages:
    109
    Joined:
    Nov 29, 2000
    Location:
    McLean, VA, USA
    Sexystang94,

    The wife has an 01 GT Auto....We had 4.10's installed and its great!!!

    The low end is how it should be!!!!!

    13.7 @ 97 2.0x 60'. Just K&N, Gears and JDM Chip....

    BTW, I did compensate via the JDM Superchip vs speedcalc or other gearing.


    Go drive one with 4.10's, its worth it!!!!

    later
     
  4. Hitman 2k1

    Hitman 2k1 New Member Established Member

    Messages:
    39
    Joined:
    Jan 28, 2001
    Location:
    Tazewell, VA USA
    With an automatic I would go with 4.10's. And if you ever decide to swap the torque convertor i'd go with a 2800 - 3000 stall for it.. You'll notice a HUGE difference in the auto with that.
     
  5. sexystang1994

    sexystang1994 5.0 Slut Established Member

    Messages:
    21
    Joined:
    Jan 10, 2002
    Location:
    Daytona Beach, Florida
    thanks

    :r: Thanks for the advice! I am going to get them soon.
     
  6. SVT X 2

    SVT X 2 I C U Established Member

    Messages:
    1,385
    Joined:
    Nov 21, 2000
    Location:
    Twin Cities
    Auto 5.0's = 4.10's !
     
  7. SVT X 2

    SVT X 2 I C U Established Member

    Messages:
    1,385
    Joined:
    Nov 21, 2000
    Location:
    Twin Cities
    Come to think of it.... they do make a 3.90 for the 8.8 now...
    Hmmmmmmmm......
     
  8. sexystang1994

    sexystang1994 5.0 Slut Established Member

    Messages:
    21
    Joined:
    Jan 10, 2002
    Location:
    Daytona Beach, Florida
    hmmm

    Now I am confused..... I was going to go with the 3.73s but everyone says 4.10s are better. Decisions decisions, lol!! Thanks for your help :):-?
     
  9. SVT X 2

    SVT X 2 I C U Established Member

    Messages:
    1,385
    Joined:
    Nov 21, 2000
    Location:
    Twin Cities
    I'm saying 4.10's cuz I used to play around with an '89 GT AOD that I had put 3.73's in and after whished I went with the 4.10's. Now that was the AOD as opposed the the 'E' that you have... but I don't know if there's a huge difference (if any) in transmission gear ratios between the two or not.

    If you're gonna go with a 3-series gear... do the 3.90's!
    I think only one manufacturer makes them right now and I can't think of who it is... might have it on file somewhere here.....
     
  10. hillie16

    hillie16 Stand Silent in Flames Established Member

    Messages:
    1,621
    Joined:
    Apr 29, 2001
    Location:
    Pennsylvania
    3:73's for a 5-speed, 4:10's for an automatic...
     

Share This Page