335/30 Nitto 555........PICS Please

[totheduals]

Looked on there web site but they don't have that size listed in 17 or 18". I'm sure I saw some on here at one time.
New for this year?
If anyone has them I would love to see some pics:banana:
Thinking they are about as wide as a 315 BFG :shrug:
Thanks

 

[bullittbuild]

i would like to see some too the 345's are too wide

 

[totheduals]

Maybe its the 345/35 I'm thinking of?
Any pics
Anyone!

 

[floyd4ford]

in 4 pics

 

[forcefedcobra]

the 335 nitto 555R is slightly wider than the 315 bfg dr in 18".

I'll try to hunt up some old pictures when I had 335 555r's on my ssr gt3's

 

[forcefedcobra]

 

[Kellyo77]

One of the hotter Cobra's on here, if I say so myself.

 

[forcefedcobra]

One of the hotter Cobra's on here, if I say so myself.

thank you! She has TF anthracite/chrome lip chicanes on her now and has also had the irs built, full fuel system, full exhaust, tubular front suspension, with a built aluminum mill all done since those pics.

 

[mooch29]

IMO the BFG's look better than the Nitto's

 

[03Honda_Hunter]

So what size rim are you all using for the 335? Would a 10 inch wheel be ok?

 

[totheduals]

IMO the BFG's look better than the Nitto's

Yes I agree but I keep hearing they don't wear well at all. :shrug: Compared to the Nitto's anyways.
Those are the only 2 I am considering.

 

[totheduals]

the 335 nitto 555R is slightly wider than the 315 bfg dr in 18".

I'll try to hunt up some old pictures when I had 335 555r's on my ssr gt3's

What width was your rim with the 335's on?
Did you have to roll your fenders and put the IRS bolt in?
:shrug:
:shrug:

 

[lancec2c30]

I think you are supposed to run low-profile IRS bolts with Nitto 315's.

 

[phil'snotch]

are those 10" wheels?

 

[R1Lello]

by the numbers 335mm should be 20mm (3/4 inch wider) than the 315 mm

 

[forcefedcobra]

What width was your rim with the 335's on?
Did you have to roll your fenders and put the IRS bolt in?
:shrug:
:shrug:

I had the low pro irs bolt and really needed to roll the fenders but instead I just threw an MM iso on the rear spring to raise it up enough to keep the tires from hitting when going over large bumps.

honestly I dont think an 18x10 wheel would work that well. The 335's on my 18x10.5's werent getting all the tread pattern on the road and should have been on an 11" wide wheel.

 

[03Honda_Hunter]

I had the low pro irs bolt and really needed to roll the fenders but instead I just threw an MM iso on the rear spring to raise it up enough to keep the tires from hitting when going over large bumps.

honestly I dont think an 18x10 wheel would work that well. The 335's on my 18x10.5's werent getting all the tread pattern on the road and should have been on an 11" wide wheel.

I thought the Nittos ran a little small compared to other tires and that their 335 was actually closer to a 315 in other brands. Most people running 315's run them on a 10 inch wide wheel right?

 

[forcefedcobra]

I thought the Nittos ran a little small compared to other tires and that their 335 was actually closer to a 315 in other brands. Most people running 315's run them on a 10 inch wide wheel right?

nitto's do tend to run smaller when compared to bfg's. I'm sure the bfg 335 is slightly wider than the nitto 335.

You more than likely can fit a nitto 335 on a 10 inch wheel but you really wont get much if any more tread on the ground compared to running a 315.

 

[bullitt3350]

335's on a 18x11 with a IRS

 

[bullittbuild]

335's on a 18x11 with a IRS

sweet ride looks like your due for another set :burnout: