Hey guys, Im working on a slow build up of my 4x4 4.6 F150 as a prerunner/sand truck. Im starting with my motor and transmission right now, Looking to build the motor early this summer and just drive the Mach during that time. But what I really need is to figure out a good combo for a safe 600hp motor, I was looking at the mod max stroker kits due to their price but wanted to get your guys input. Im guessing basicly all 2V mustang motor parts will work with the F150 motor.
Im looking for good crank, pistons, and rods and also all bearings, rings, and some ARP goodies to keep it together. I plan to bore the block .20 over and am looking for mild compression in the 9-10.5 range.
Also trying to find out if a 4R100(lightning trans) will drop into my 4x4 4.6 truck if anyone has the answer to that aswell.
any help would be appreciated!
Im looking for good crank, pistons, and rods and also all bearings, rings, and some ARP goodies to keep it together. I plan to bore the block .20 over and am looking for mild compression in the 9-10.5 range.
Also trying to find out if a 4R100(lightning trans) will drop into my 4x4 4.6 truck if anyone has the answer to that aswell.
any help would be appreciated!
Last edited: