4 Valve Swap Question

[stangfreak03GT]

I currently have an 03 2 valve that I'm doing a 4 valve swap with. I have a built WAP block out of an 03 Mach and just bought a set of 98 4 valve B heads.

Question: What timing cover should I get? Or, does it matter?

Thanks!

 

[svtcobralover]

you will need a B-headed timing cover. But I would suggest getting rid of the B-heads and going with C-heads. You will be better off for the future. Doesn't make sense to install the motor and have to replace the heads a second time when you want to upgrade.

 

[Quick96Mystic]

you will need a B-headed timing cover. But I would suggest getting rid of the B-heads and going with C-heads. You will be better off for the future. Doesn't make sense to install the motor and have to replace the heads a second time when you want to upgrade.

:beer:

 

[stangfreak03GT]

you will need a B-headed timing cover. But I would suggest getting rid of the B-heads and going with C-heads. You will be better off for the future. Doesn't make sense to install the motor and have to replace the heads a second time when you want to upgrade.

Thanks. The B heads have a stage 3 port on them, that's why I went with them.

 

[stangfreak03GT]

Just bought a 4V timing cover off a 98 cobra.

Thanks for the help fellas!