NO TRADES!
READ ENTIRE AD BEFORE CONTACTING ME!
Call or text me at (775)720-1735
***Price $28,000***
Selling my 2003 Cobra Terminator
Clean title In HAND!!!!!
Car is clean with 33,000 miles. Motor was built at 25,000 miles and runs awesome. Balanced and blueprinted stroker built by Heath at Modular Madness West. Built to handle 1200+hp. Have all the documents to go along with motor and the build of the car. No expense was spared. Car does have a nitrous kit but I have never used it. Original owner used it once or twice in salt lake at the track and the car ran a 10.2 @ 139 @5500ft elevation. Car makes 652.8hp at the wheels on all motor with whipple and over 800hp with the nitrous.
Engine Specs:
5.0 stroker (balanced and blueprinted)
Bored .20
Kellog Stroker Crank 3.75
Manley Billet i-beam rods
Manley forged Pistons
Stainless Valves
ALL ARP hardware main and head studs.
New oil pump
Moroso deep oil pan 9qt capacity
JLT high boost Intake
LDC Head Cooling Mod
60lb injectors supplied by CPR fuel rails
Big fuel line upgrade
2.3 Whipple Gen 1 (19lbs on current tune/pulley combo 3.50 upper, 4Ib Lower, 3.20 alternator pulley)
New Supercharger Belt
2 stock fuel pumps on a dual hat.
KB Boost-a-Pump
BBK Ceramic Coated Long Tube Headers
BBK High Flow Catted X-pipe
Flowmaster 2 1/2"
LFP Heat exchanger
Crome Valve Covers
Innovators West balancer
Accufab Single Blade Throttle Body
Stand alone nitrous kit 100 shot. Motor was built to handle nitrous. Can go with a bigger kit if you want I have never used it.
Billetflow 100mm idlers
Bigger Alternator Pulley
LFP overflow tank
Moroso Coolant Tank
Trans and rear end:
stock t56
26 spline input shaft
Spec 3+ clutch and flywheel
Mcleoud Throw out bearing
MGW Short throw Shifter
3.73 gears (just installed in January)
LPW diff cover
Full length welded subframe connectors
Driveline Hoop
Kenny Brown rear suspension upgrades
Poly bushings
DSS lvl 5 half shafts (recently sent back rebuilt and upgraded to newer style)
Billet hubs with extended Moroso Wheel Studs
BBK Caster Camber Plates
SLP line lock
New Brakes with Drilled and Slotted Rotors
Steeda adjustable clutch quadrant
Exterior:
lowered on H&R Sport Springs
Smoked Taillights
New Clear lens Headlights
Redline Tunning Hood Struts
shorty antenna
HID lights conversion (headlights and fog lights)
Tinted Windows
17x9 in the front with brand new tires
17x10 in the rear with 315 Nittos
Drilled and Slotted rotors with new brake pads
Carbon Driven Carbon Fiber Side skirts.
Polished Exhaust
Interior:
5 autometer lunar series: Oil Pressure, boost, AFR, water temp, fuel pressure.
Pro Car by Scat Racing seats buyer chooses between stock or racing seats.
Car comes with original certificate and letters from SVT as well as build reciepts!
***Price $28,000***
CONTACT ME AT (775)720-1735
VIDEO:
READ ENTIRE AD BEFORE CONTACTING ME!
Call or text me at (775)720-1735
***Price $28,000***
Selling my 2003 Cobra Terminator
Clean title In HAND!!!!!
Car is clean with 33,000 miles. Motor was built at 25,000 miles and runs awesome. Balanced and blueprinted stroker built by Heath at Modular Madness West. Built to handle 1200+hp. Have all the documents to go along with motor and the build of the car. No expense was spared. Car does have a nitrous kit but I have never used it. Original owner used it once or twice in salt lake at the track and the car ran a 10.2 @ 139 @5500ft elevation. Car makes 652.8hp at the wheels on all motor with whipple and over 800hp with the nitrous.
Engine Specs:
5.0 stroker (balanced and blueprinted)
Bored .20
Kellog Stroker Crank 3.75
Manley Billet i-beam rods
Manley forged Pistons
Stainless Valves
ALL ARP hardware main and head studs.
New oil pump
Moroso deep oil pan 9qt capacity
JLT high boost Intake
LDC Head Cooling Mod
60lb injectors supplied by CPR fuel rails
Big fuel line upgrade
2.3 Whipple Gen 1 (19lbs on current tune/pulley combo 3.50 upper, 4Ib Lower, 3.20 alternator pulley)
New Supercharger Belt
2 stock fuel pumps on a dual hat.
KB Boost-a-Pump
BBK Ceramic Coated Long Tube Headers
BBK High Flow Catted X-pipe
Flowmaster 2 1/2"
LFP Heat exchanger
Crome Valve Covers
Innovators West balancer
Accufab Single Blade Throttle Body
Stand alone nitrous kit 100 shot. Motor was built to handle nitrous. Can go with a bigger kit if you want I have never used it.
Billetflow 100mm idlers
Bigger Alternator Pulley
LFP overflow tank
Moroso Coolant Tank
Trans and rear end:
stock t56
26 spline input shaft
Spec 3+ clutch and flywheel
Mcleoud Throw out bearing
MGW Short throw Shifter
3.73 gears (just installed in January)
LPW diff cover
Full length welded subframe connectors
Driveline Hoop
Kenny Brown rear suspension upgrades
Poly bushings
DSS lvl 5 half shafts (recently sent back rebuilt and upgraded to newer style)
Billet hubs with extended Moroso Wheel Studs
BBK Caster Camber Plates
SLP line lock
New Brakes with Drilled and Slotted Rotors
Steeda adjustable clutch quadrant
Exterior:
lowered on H&R Sport Springs
Smoked Taillights
New Clear lens Headlights
Redline Tunning Hood Struts
shorty antenna
HID lights conversion (headlights and fog lights)
Tinted Windows
17x9 in the front with brand new tires
17x10 in the rear with 315 Nittos
Drilled and Slotted rotors with new brake pads
Carbon Driven Carbon Fiber Side skirts.
Polished Exhaust
Interior:
5 autometer lunar series: Oil Pressure, boost, AFR, water temp, fuel pressure.
Pro Car by Scat Racing seats buyer chooses between stock or racing seats.
Car comes with original certificate and letters from SVT as well as build reciepts!
***Price $28,000***
CONTACT ME AT (775)720-1735
VIDEO:
