96-01 Cobra Stock 11" Clutch and Pressure Plate *Only 166 Miles*

NeoTokyo

Active Member
Established Member
Joined
Dec 7, 2009
Messages
1,030
Location
Sacramento Ca, Springfield Mo
For sale is a minty 166 mile 96-01 11" Cobra clutch and pressure plate, P/N 1R33-7550-BA. This was a kit that included the flywheel but the flywheel was already sold.

GT's running an 8 bolt 11" flywheel can use this clutch.

Removed from a 97' Cobra after a bad rebuild, the clutch was replaced when the engine was put back in and we have a pic of the trip to show the miles.
The trip was of course set (as it should be) to keep track of the break in period.

The pressure plate is in perfect shape without a single crack, as it should be with so few miles. I cleaned the pressure plate and surfaced it by hand to show its perfect condition as it was dirty from sitting.

I removed no material when I surfaced it, I used 3M P220 wet sandpaper with Mothers Mag polish as the wet medium to clean the light surface rust.

Its hard to see in the pictures but the factory machined grooves are still present.


I am asking $90 Paypaled and shipped.

Here are some pics with the ol Cell phone, if you need a better photo just ask and I will break out the 1D Mark III and 24-105mm.

The cluster with the trip.

2581198815_d53ab02f42_z.jpg


The Clutch Disk.

5369364846_65def71223_b.jpg


5368755569_7d2c319789_b.jpg


The Pressure Plate.

5368754535_4cae669a43_z.jpg


5368755187_007b5aee00_z.jpg


5369366726_b648a1c6bb_z.jpg


5369364210_2097060d6b_z.jpg


The Beauty it came from.

2568384499_37c2cc7130.jpg


2569220350_1216dd5014.jpg


2581201967_442948e321_z.jpg


2568395335_4cd678d284.jpg
 
Last edited:

Users who are viewing this thread



Top