Planning to build the teksid in my 96 cobra next year and wondering what pistons and rods folks are running these days? I would like a 4032 piston like the mahle dished but 8.7 compression is a bit weak. I’m planning on running a v3 sci 10lbs or so, nothing special just a pump gas play around deal. I like the DSS offerings but have no experience with them.
96 Cobra Teksid build
- Thread starter jv72jv
- Start date
The stock piston has a 3cc dish so if you can find something similar to that you will have close to the stock compression ratio.
If you're staying at 10psi you should bump the compression. If you smooth the chambers on the heads you're gonna gain volume to where the dish brings you even lower compression. I would do flat top at the very least.
Users who are viewing this thread
