Just don't have any interest in it anymore. Need something with 4 doors and more room for the baby. That's the only reason I'm selling.
Price is $8,500
50,xxx miles on the chassis and 5,000 since the motor was built
-Built motor for nitrous
-Viper spec t-56 6 speed
-Forged mahle flat top pistons
-forged manley h-beam rods
-04 cobra crank polished
-MMR high volume oil pump
-new water pump
-ARP hardware. heads studs, crank bolt, mains. everything
-msd wires
-C&L cold air with inlet tube
-underpullies
-steeda alum radiator
-2 speed fan
-ported intake
-t-56 tranny
-Alum. flywheel
-king cobra clutch
-alum driveshaft
-pro 5.0 short
-subframe connectors
-strut tower brace
-caster/chamber
-5 point harness on drivers seat
-leather, a/c, pw, pl, cruise, tilt, mach 460
-18x9/10 ADR M-Sports with like new nitto's
interior 9 of 10- no rips
exterior 9 of 10- clear coat is perfect, very nice looking
Throwout bearing makes a little noise, but I ordered a new throwout and pilot bearing from lethal that will go with. Egr is throwing a code, but I have a egr delete for it also. I'll also include a brand new sct eliminator chip so whoever buys it can get it tuned. Other then those minor issues, I've never had a problem with it, and absolutely wouldn't hesitate to drive it anywhere.
Post here, pm me, or shoot me a text if interested (615)633-2572
I'll try to have some decent pics up soon, but until this this is all I have:
Price is $8,500
50,xxx miles on the chassis and 5,000 since the motor was built
-Built motor for nitrous
-Viper spec t-56 6 speed
-Forged mahle flat top pistons
-forged manley h-beam rods
-04 cobra crank polished
-MMR high volume oil pump
-new water pump
-ARP hardware. heads studs, crank bolt, mains. everything
-msd wires
-C&L cold air with inlet tube
-underpullies
-steeda alum radiator
-2 speed fan
-ported intake
-t-56 tranny
-Alum. flywheel
-king cobra clutch
-alum driveshaft
-pro 5.0 short
-subframe connectors
-strut tower brace
-caster/chamber
-5 point harness on drivers seat
-leather, a/c, pw, pl, cruise, tilt, mach 460
-18x9/10 ADR M-Sports with like new nitto's
interior 9 of 10- no rips
exterior 9 of 10- clear coat is perfect, very nice looking
Throwout bearing makes a little noise, but I ordered a new throwout and pilot bearing from lethal that will go with. Egr is throwing a code, but I have a egr delete for it also. I'll also include a brand new sct eliminator chip so whoever buys it can get it tuned. Other then those minor issues, I've never had a problem with it, and absolutely wouldn't hesitate to drive it anywhere.
Post here, pm me, or shoot me a text if interested (615)633-2572
I'll try to have some decent pics up soon, but until this this is all I have:
Last edited: