99-04 procharger need pics

[01SilverGt]

I broke a belt on my 01 gt can someone post a pic or a diagram. Any help appreciated thanks.

 

[01SilverGt]

Anyone...

 

[brian97cobra]

here are a couple of my old car. i dont have many sorry hope this helps

 

[redfire04gt]

There are two versions...one for the single bolt timing cover and another for the three bolt version. A quick google search and you would have found this....I'll make it easy for you! :beer:

Read post 10 of this thread. They included pictures from the procharger manual.
difference between 99 and 00 belt drive

 

[01SilverGt]

Thanks guys

 

[01SilverGt]

Hey off topic does procharger make a 3.80 6 rib pulley?

 

[redfire04gt]

Not sure about a 3.80, I've never seen one. They make a 3.85 and then a 3.7.

 

[phatboy5015]

Why would you want one that big? I had a 3.6" and made 10-11 psi. I just switched to a 3.2" and now see 14 psi. I'm still on the stock bottom end, but I'm running methanol. It runs a lot harder with the 3.2" pulley, obviously.

 

[redfire04gt]

lol because he wants his shortblock to last. Your taking a big chance running 14 psi on a stock shortblock meth or not.

OP - a 3.85 will net you about 8 psi assuming the car is mostly stock besides some bolt ons. A 3.7 closer to 9-10 psi. I would make the choice between these 2 an run one of those. On 8 psi (3.85 pulley) I made 403hp and 404tq with only other mods being full exhaust and tb/plenum. Then I built a motor!

 

[phatboy5015]

lol because he wants his shortblock to last. Your taking a big chance running 14 psi on a stock shortblock meth or not.

OP - a 3.85 will net you about 8 psi assuming the car is mostly stock besides some bolt ons. A 3.7 closer to 9-10 psi. I would make the choice between these 2 an run one of those. On 8 psi (3.85 pulley) I made 403hp and 404tq with only other mods being full exhaust and tb/plenum. Then I built a motor!

While it's not the most popular to run 14 psi, I know of a few other people that have run even more boost for over 50k miles on a stock shortblock. But I understand somebody staying on the safer side of things.

But honestly, I wouldn't even consider running less than 10 lbs. Not only will you make less peak power, but it will come in slower too..

 

[01SilverGt]

Yea I made 10 psi with 3.85 pulley and Anderson power pipe. I wanted a little more boost so I bought a 3.75 and making 12 plus pounds. More boost then I wanted. It's. d1sc.