Aeroforce gauge install question.

[GHIG'13]

Ok, so I got the gauge installed but my boost won't show and my a/f is reading in the negative range. I think I have the boost figured out but the a/f is freaking me out. I have it reading, short term trim b1, is that right or should it be something else? Thanks for any help.

 

[GHIG'13]

After 3 hours and many google searches I got it figured out. First I needed to be in platform4, I wasn't, second I needed to monitor B1S1 a/f ratio and B2S1 a/f ratio. Lastly for boost I needed to monitor analog1, slope entered as 014.0 and intercept entered as -14.0. Thanks to all that have asked and answered these questions before me.