Aeromotive +BAP

[alghanim]

Hi every one,
Did any body try the combination between
The Aeromotive in-tank fuel pump and KB 20V boost a pump at the same time
is the pump will handle the extra volts
and whats the HP can be support with this combination ,,

 

[Kempf]

Hi.

This would interrest me too.

Cheers

 

[Speedboosted]

A KB BAP is rated for like 800 hp on its own...anything more and most people just go to a return style fuel system. At least that is what a few people who I've talked to that are over 800 rwhp have done

 

[Marty Staggs]

Subscribed

 

[Blackmax]

I run twin 325's along with 20 BAP, I would not attempt this unless you have a good tuner.

 

[alghanim]

I run twin 325's along with 20 BAP, I would not attempt this unless you have a good tuner.

with good tune ,whats the HP this combination will support ,,

 

[Blackmax]

with good tune ,whats the HP this combination will support ,,

First off this was not a plug and play, you need a good tuner that knows his stuff. I ended up at around 82% duty cycle @ 750 rwhp on a Mustang dyno. I proved the dyno to be correct as I ran 10.2 at track. I now have a 4.2 KB and hope to tune to 900rwhp and still have 5% duty cycle left at least. We will datalog at track because the load ratings will be different. In my opinion this is maxed out for the set up.