Just lowered the car this past weekend with Steeda Sport. 1 iso rear, and no iso's front. Took the car to my local ford dealership to get it aligned. I knew going in that it was going to be off alot. Get the call saying they couldn't align it. These are the specs
LEFT FRONT RIGHT FRONT
Camber -1.2 Degrees Camber -1.3 degree
Caster 3.9 degrees Caster 3.2 degree
Toe 0.41 degrees Toe -0.12 degree
LEFT REAR RIGHT REAR
Camber -0.8 Camber -1.1 degree
Toe 0.30 degree Toe 0.27 degree
Total toe FRONT 0.28
Stear Ahead 0.27
Total toe REAR 0.57
Thrust Angle 0.02
So my question is do I need to get Caster/Camber plates and which is best? Or take it somewhere else and let someone get as close as possible and still be just alittle off. Everyones help is greatly appreciated. Looking for some Alignment GURU.
LEFT FRONT RIGHT FRONT
Camber -1.2 Degrees Camber -1.3 degree
Caster 3.9 degrees Caster 3.2 degree
Toe 0.41 degrees Toe -0.12 degree
LEFT REAR RIGHT REAR
Camber -0.8 Camber -1.1 degree
Toe 0.30 degree Toe 0.27 degree
Total toe FRONT 0.28
Stear Ahead 0.27
Total toe REAR 0.57
Thrust Angle 0.02
So my question is do I need to get Caster/Camber plates and which is best? Or take it somewhere else and let someone get as close as possible and still be just alittle off. Everyones help is greatly appreciated. Looking for some Alignment GURU.