Did u guys put a cotter pin in the blot on the lower control arm when installing your belltech spindles??? because it seems to me that u have to cut the bolt down a bit for the wheel to even go on. Is this true???
Am i supposed to do this???
- Thread starter ChuteboxeL03
- Start date
ChuteboxeL03 said:
What size wheels are you running?
the stock 18's
someone please chime in, my trucks on stands and i wanna kno wat to do before i screw somethin up.
Yes you have to trim the lower ball joint stud.
Approx even with the cotter pin hole.
If you want to use a cotter pin, you have to drill a new hole for it.
Good Belltech 'how-to' info here:
http://www.timskelton.com/lightning/race_prep/suspension/spindles.htm
(photo courtesy of Tim Skelton)
Approx even with the cotter pin hole.
If you want to use a cotter pin, you have to drill a new hole for it.
Good Belltech 'how-to' info here:
http://www.timskelton.com/lightning/race_prep/suspension/spindles.htm
(photo courtesy of Tim Skelton)
Last edited:
buddy ur a life saver, serious. Thanks alot man its been drivin me nuts.
Thank Tim Skelton... not me.....ChuteboxeL03 said:
He has a great, informative website which documents all the popular Lightning handling and chassis mods.
Lots of photos for those that don't like reading instructions. :read:
http://www.timskelton.com/lightning/mods.htm
Last edited:
Users who are viewing this thread
