Here is the list I have put together that I will update as I go. Should be mostly all inclusive. Until the trans is sitting here, can't be sure. Obviously the trans & converter came out of a running 2000 Mustang, so I ASSUME the electronics, speedo, shift bracket, etc are all correct. Using toggle switches & relays, I plan to wire the trans brake to the coast button on the steering wheel & the line lock to the off button. OD with simply run off a toggle/relay. I already purchased some items like the Mach 1 brake pedal, shift bezel, & block plate.
A little surprising that beyond the trans & converter..........you still need to spend another $1000 in parts, give or take a couple hundred dollars with the pieces you choose. Once I finish going over all this, put in the order by eod on Friday. Most is coming from Summit. Oil is not even listed since I can get that locally, as well as wiring & other misc stuff I am sure to run into.
Flexplate 8-bolt PAX28111 $138
Driveshaft Yoke (1330 u joints) www.dennysdriveshaft.com (2-3-14061X) $70
B&M 70297 Cooler $260
SUM-220984 Hose 10ft (x2) $80
SUM-240114B -6 AN hose to ¼ npt male (x2) $30
Fragola 194568-BL -6 AN to ½ npt male (x2) $52
Derale Temp Gage13009 $50
ARP-254-2901 flex plate bolts $42
Pilot 3 toggle switch kit. $30
ARC-1440 4 relay kit $60
AAF-ALL34152 & AAF-ALL34153 O2 Bungs $18
Total $895
For Reference
ECM F5SB-14A624-----not needed
Trans Kickdown Cable Bracket XR3Z-7B229-AA ------not needed
Shift Interlock Cable F6ZZ-3F719-AC ----not needed
Plug for the Mechanical Speed Sensor F2UZ-7H183-A ----not needed
Digital Range Transmission Sensor F7LZ-7F293-AB. Also called shift position sensor-
make sure you get the kit with the spacers and bolts. -----not needed
99-04 GT 4R70W Transmission Wiring Harness 1R3Z-7C078-BA www.tascaparts.com $65 -----Bought from Torrance and saved $15, so now $50
Shifter Bezel 3R3Z-6304567-AAB ---- Bought it
Brake Pedal Assembly 3R3Z-2455-AA ---- Bought it
Automatic Block Plate ---- Bought it
Dipstick Tube XR3Z-7A228-BA ----with trans
Dipstick XR3Z-7A020-BA -----with trans
Speed Sensor 1L3Z-7H103-AB -----with trans
Shift Lever Stud E43Z-7B415-A -----with trans
Trans Shift Cable XR3Z-7E395-AA -----have hurst cable
Shifter Assembly 1R3Z-7210-AA -----have B&M
Transmission Crossmember and Isolator 2R3Z-6068-FJ -----Using T56 unit
Driveshaft Shop Fdsh14 Aluminum Driveshaft -------$405 (Summit) got one on Corral for $335 shipped
Looking to do this swap also, is this the complete list of parts that I would need to do the swap?