Hey guys.
Havent been on in a while, been pretty busy, but I do have something someone on here might be interested in.
I have a Fully Forged 5.4 Shortblock for Sale, this is my own private build, Im not selling it for my shop, so before anyone gets in a tizzy, Im not trying to sell without being a vendor, this is "another" 1 time deal.
{It was going in my 01 GT that I have since decided to go a very diff. route.}
HCR Provate Label H-Beam rods, ARP Rod bolts, FM Bearings, File fit moly rings, HCR Custom Forged Pistons {Made by probe} {oem bore}
{I was doing this build this thinking I was going to do a 5.4 conversion in my 01 gt, but have changed my mind drastically}
So, that being said, Bob please dont boot the ad as Im not trying to take away anyones glory...{smile}
I would like to sell this build for 3k including freight to your front door anywhere in the cont. U.S.A., but remember, this isnt a regular thing for me on here, this is a "occasional", so dont expect to be able to wait on the next one around, if you want a bullit proof shoortblock, here you go.
If you go thru JDM for your tune I can give you a HP estimate.
A customer dynoed this identicle build for a and running his heaton with 13-14 psi he layed down 509hp @ 4,700 RPM and 569 FT LB TQ @ 4300. {he was featuring HCR ported heads also}
Your power level may differ of course..
You can my personal email direct at [email protected] if you have any questions, as due to current family issues Im not on here much as of late..
All the parte are here and all machine work is done, I wont assemble {specific ring set/ring end gap} based upon its intened use.
Thanks in advance everyone!!!!
Stay safe and have fun!!!!!!!!!!!!!!!1
Havent been on in a while, been pretty busy, but I do have something someone on here might be interested in.
I have a Fully Forged 5.4 Shortblock for Sale, this is my own private build, Im not selling it for my shop, so before anyone gets in a tizzy, Im not trying to sell without being a vendor, this is "another" 1 time deal.
{It was going in my 01 GT that I have since decided to go a very diff. route.}
HCR Provate Label H-Beam rods, ARP Rod bolts, FM Bearings, File fit moly rings, HCR Custom Forged Pistons {Made by probe} {oem bore}
{I was doing this build this thinking I was going to do a 5.4 conversion in my 01 gt, but have changed my mind drastically}
So, that being said, Bob please dont boot the ad as Im not trying to take away anyones glory...{smile}
I would like to sell this build for 3k including freight to your front door anywhere in the cont. U.S.A., but remember, this isnt a regular thing for me on here, this is a "occasional", so dont expect to be able to wait on the next one around, if you want a bullit proof shoortblock, here you go.
If you go thru JDM for your tune I can give you a HP estimate.
A customer dynoed this identicle build for a and running his heaton with 13-14 psi he layed down 509hp @ 4,700 RPM and 569 FT LB TQ @ 4300. {he was featuring HCR ported heads also}
Your power level may differ of course..
You can my personal email direct at [email protected] if you have any questions, as due to current family issues Im not on here much as of late..
All the parte are here and all machine work is done, I wont assemble {specific ring set/ring end gap} based upon its intened use.
Thanks in advance everyone!!!!
Stay safe and have fun!!!!!!!!!!!!!!!1