Anyone ran Steeda Ultra-lite springs on their 13/14?

[Rb0891]

Have them left over from the ‘11 GT I had. Was wanting to lower the Shelby a bit. I assume they would work?

 

[sonicx]

Send it. Although I’d upgrade my struts /shocks if I were to go with that particular spring rate.

 

[Rb0891]

Send it. Although I’d upgrade my struts /shocks if I were to go with that particular spring rate.

Shite. I don't even know what the spring rate is... Got them from a buddy but I ended up doing the Eibach pro kit on my GT. They appear to be a relatively soft spring, but I see no specs.

 

[sonicx]

Shite. I don't even know what the spring rate is... Got them from a buddy but I ended up doing the Eibach pro kit on my GT. They appear to be a relatively soft spring, but I see no specs.

Call up steeda but these should be what you have: Steeda Ultra-Lite Mustang Lowering Springs (2005-2014), 555 8206

 

[GerryMX]

Call up steeda but these should be what you have: Steeda Ultra-Lite Mustang Lowering Springs (2005-2014), 555 8206

Maybe my friend should call Steeda as well. He's looking at this 2014 Shelby GT500 but the current owner wasn't sure what's the spring rate of the Steeda spring installed by the first owner. We'll take a closer look at her tomorrow after we finished installing the brake pads and jeep wheels onto the Wrangler.