Anyone Running a Ford Control Pack in something Engine Swapped?

[SID297]

I'm looking for a little tuning information.

 

[01yellercobra]

Not me personally, but I know a guy running a Coyote swapped 93 Cobra with a Whipple. He's running a control pack and it's been tuned by Lund.

 

[Saleen498]

I'm actually in the middle of doing this now. Gen 2 control pack in a new edge. If your question is about quality after running I cant answer that yet but as far as ease of installation, it's pretty straight forward. There are solutions out there for cruise control and stock guages
Lund can tune it. I talked to them last week about that.

 

[railroad]

I put a Gen 1 Aluminator in a Cobra kit car and used the Ford installation kit, which include ECU and drive by wire pedal.
I had it tuned by Lund.

 

[DiB14-SAFD]

I put a Gen 1 Aluminator in a Cobra kit car and used the Ford installation kit, which include ECU and drive by wire pedal.
I had it tuned by Lund.

That sounds fun, got any pics?

 

[railroad]

Here are a couple of pics,,,
I was not able to run the short intake with large air filter.
MAF sensor needs to be about 11 inches from throttle body.

 

[SLOWBRA]

I’m running a Gen 3 control pack with my Gen 3 swapped Cobra. Likely going to buy HP Tuners or go with Lund.


Sent from my iPhone using svtperformance.com

 

[floodstang]

Here are a couple of pics,,,
I was not able to run the short intake with large air filter.
MAF sensor needs to be about 11 inches from throttle body.

I will own a Cobra replica one day! Blue and white just like yours. Except with FE power. Nasty, rowdy FE power!