ARP Main studs orientation

[orngpel]

I took my motor apart back in June, machine shop is all done with it now and I cant remeber where the studs for the windage tray go. There are only four studs that have the added length for the windage tray. does anyone remember which main caps they go in. I looked at the windage tray and it seems I dont really need the studs to hold it on it only mounts to the oil pans bolts. I know two of them go in the #4 main cap for the oil pick up tube. but need to know where to put the other two. Thanks Ryan

 

[NastyNate420]

I think they go in the number 3 and 4 mains. I need to know as well. I went back through my pictures but never got a shot of it as I had to hurry up and get the block to the machine shop. Hopefully someone else can chime in.

 

[98 N/A 4V]

Yes. They go in the 3-4 mains.

 

[orngpel]

Yes. They go in the 3-4 mains.

Cool Thank You! I have a Teskid Block tho is it still the same? At this point I am thinking it may not really matter the only thing that bolts to them is the pick up tube so as long as my windage tray fits i am gonna put them in the 3-4 caps.

 

[98 N/A 4V]

Yes Teksid still the same. I actually used my 4.6 teksid windage tray on my 5.4 build.

 

[orngpel]

Yes Teksid still the same. I actually used my 4.6 teksid windage tray on my 5.4 build.

Thanks Again