Need help! Installing thse on my 2003 GT. I am stuck on the passenger side. How the hell do you tighten the nut that is above the second exhaust port (counting from the front)? There is absolutely no clearance to get at it.
My question is the k member dropped? I used a wrench i cut and shortened to tighten them when I had the I also used 1/4 ratchets and etc to make it work but only when the k member was droppedPictures?
Like thisMy question is the k member dropped? I used a wrench i cut and shortened to tighten them when I had the I also used 1/4 ratchets and etc to make it work but only when the k member was dropped
Sent from my SM-N975U using Tapatalk
My question is the k member dropped? I used a wrench i cut and shortened to tighten them when I had the I also used 1/4 ratchets and etc to make it work but only when the k member was dropped
Sent from my SM-N975U using Tapatalk
Ok i wasn't sure was it still out or back in ? LolLast I checked based on other threads he has posted in the K is out because he is in the middle of a swap.
Yes. Those would stand a chance as long as the shaft is long enough that the breaker bar / ratchet clears the exhaust tube. Even a better chance if you use a bolt instead of the stud.
Essentially, the same idea as what I cobbled together.