Used on an 03, but it should work on ealrier cars, as well. However, I'm not able to locate a p/n on the TB itself. It is the twin 65mm unit.
The inner bores have been polished smooth, otherwise it's as it comes from BBK. I had no problems with it other than a hunting idle b/c the motor would draw it open under some conditions. For remedy, I added a throttle return spring from a Lightning, which I'll include for the buyer. No gasket. Works great, but selling car.
Here are some details from BBK's website.
• Twin 62mm unit flows approximately 30% better than the factory twin 57mm part with the twin 65mm at nearly 45% more air flow
• Direct bolt-on, no modifications necessary
• Adds approximately 10-12 horsepower over stock throttle body
• Machined from high-quality 356 aluminum
I have seen one fetch $280 on eBay, and they retail for about $340 NEW.
I'll take $250 shipped in the 48 states
Paypal preferred, and add the % if cc'ing, please.
Thanks
The inner bores have been polished smooth, otherwise it's as it comes from BBK. I had no problems with it other than a hunting idle b/c the motor would draw it open under some conditions. For remedy, I added a throttle return spring from a Lightning, which I'll include for the buyer. No gasket. Works great, but selling car.
Here are some details from BBK's website.
• Twin 62mm unit flows approximately 30% better than the factory twin 57mm part with the twin 65mm at nearly 45% more air flow
• Direct bolt-on, no modifications necessary
• Adds approximately 10-12 horsepower over stock throttle body
• Machined from high-quality 356 aluminum
I have seen one fetch $280 on eBay, and they retail for about $340 NEW.
I'll take $250 shipped in the 48 states
Paypal preferred, and add the % if cc'ing, please.
Thanks