Bbrakes creaking !!!

stang.99

Member
Established Member
Joined
Apr 6, 2010
Messages
358
Location
QC
Brakes creaking !!!

After front pad change my brake is now creaking exactly like this : http://youtu.be/FqZn5Vj5lZw

Noise happen every time (car run or not / any speed). but braking power is good.

I already greased pad, pin,.. noise still there :-S

Is anyone had this issue ? thanks
 
Last edited:

SVT_Troy

Well-Known Member
Established Member
Joined
Jun 23, 2011
Messages
5,324
Location
Virginia
Besides the pad what did you actually grease? I'm wanting to know if you removed the two caliper to caliper bracket pins that are covered by the boots? I remove the boots, make sure they aren't ripped, clean the pins and the holes they slide into then re-lube ensuring that I am not over-lubbing. If you just stuff a bunch of grease in the holes the pins will not want to slide in as much as its supposed to.

Also check over all of your hardware for tightness.

Besides that I think you need to jack up the front end, remove the wheel and have someone pump the brakes while you closely inspect and narrow down what is exactly squeaking.

These being the pins/boots I'm talking about:

hardwarepins.jpg
 
Last edited:

Users who are viewing this thread



Top