Belt Size Help Needed ASAP!

[Bonefish]

Okay I need to buy a belt but, not sure exactly which one I need. Tried Cobrabobs website but, my exact combo is not really there...it is as follows:

1-2.80 RR upper
1-100 mm auxilary idler
3- 90 mm replacement idlers
1-4lb LFP lower

Your help is very appreciated!

Thanks!

 

[03silverdrop]

I believe the belt size i have with the similar set up is the gates k080780. You can get this belt at napa. Hope that helped.

 

[CobraBob]

When you find out which belt please email me and I'll add it to my Belt Table. Thanks.

 

[Bonefish]

When you find out which belt please email me and I'll add it to my Belt Table. Thanks.

You got it!

 

[Bonefish]

Okay..I have about 3 to 4 belt sizes provided on this one...but, it looks as though it's going to be some where around an 79 to 80..so, guess I'll be buying a few belts...and figure it out...on a side note..which ever ones don't work..I'll be selling!

 

[gregs 03 cobra]

I need a belt size for a 2.8 upper and a 2 lb lower and 1 aux idler!!!!!

 

[Bonefish]

When you find out which belt please email me and I'll add it to my Belt Table. Thanks.

I need to change this a bit...I had 3-100mm RR idlers and 1-90mm RR idler with a 2.80 upper and 4lb lower...and the belt was............78.5

 

[gregs 03 cobra]

Still looking for a belt size for my combo....

 

[o4cOb|2a]

I need a belt size for a 2.8 upper and a 2 lb lower and 1 aux idler!!!!!

Try this gatorback belt part # 4080760 I was told it would work for that combo. I am going to run that same combo when my stuff gets here in a few days.

 

[gregs 03 cobra]

If you would let me know how the 76 fits when you install it I would appreciate it!
Greg