whats up guys. so I decided to change out the sparkplugs this weekend and everything was goin good until the end. we finished replacing the plugs and when i turned the key to start the truck gas was gushing out o the top of the injector. can anybody tell me whats wrong.
big problem
- Thread starter turo123
- Start date
You either did not get the fuel rail sat down back on top of the injector O ring or you cut the O ring. Loosen the fuel rail and push down on the rail. Tighten the bolts and see if it is still leaking.
see above
Auto zone carries the replacement o rings. there like $4 bucks in a set of 8 and Im pretty sure there red not blue. Might as well change them all!
Thanks alot guys problem fixed. I got a new one now , now that the fuel injectors are fixed my boost guage iisnt working, it was working befor i changed the plugs out. The boost guage is stuck right at the 0 mark. It wont go all the way down and wont go up when i hit the gas.
recheck your vacum lines, thats a vacum problem!
Sounds like you are missing something when you hooked everything back up.
could it be that one of them is not connected all the way.
sure could!
The boost line is right next to the brake booster and it goes over to the drivers side of the engine.
Users who are viewing this thread
