Brake lights no longer working....

ram360

Running on 7 Cylinders
Established Member
Joined
Nov 22, 2008
Messages
471
Location
PA
So I found out yesterday my brake lights all of a sudden stopped working. Everything else is still fine, taillights, turn signals, etc... Sound like a fuse? If it is, anyone have a location? Not sure if it's that or possibly the switch on the brake pedal itself. Thanks guys.
 

1wild-horse

Purveyor of missed information
Established Member
Joined
Apr 4, 2009
Messages
3,399
Location
IA
f2.33 15 amp. only circuit on that fuse. ck f2.41 15 amp
as well since it runs through the multifunction switch.
 

ram360

Running on 7 Cylinders
Established Member
Joined
Nov 22, 2008
Messages
471
Location
PA
I changed the fuses then put a new brake light switch in today...prob fixed. thanks guys!
 

TVSCobra

Active Member
Established Member
Joined
Sep 25, 2007
Messages
2,551
Location
Georgia
glad you found the problem. Fuses don't just blow by themselves, they blow due to excessive amperage draw. i.e. short to ground, incorrect bulb being used, etc.
 

ram360

Running on 7 Cylinders
Established Member
Joined
Nov 22, 2008
Messages
471
Location
PA
no, the fuses were fine. My brake light switch was bad. $8 and 5 min to swap it out.
 

Users who are viewing this thread



Top