breaking / throwing belt issues

[44shelby]

I have recently purchased another 03 cobra and the previous owner replaced the alternator on it right before I purchased it and well to keep a long story short I have issues with the belt wanting to walk off the crank towards the front of the car now. It had a bunch of washers and non oem spacers on the alternator bracket so i took all those off and I'm starting from scratch now (currently walking off towards the front of the car). If anyone has the factory ford hardware / spacer that goes on the bottom bracket I'd like to purchase that from you.


This is a kmj alternator for what it matters

Edit: i missed one hardware store washer and the belt looks to be aligned for the most part.

I still would like to purchase that bottom bolt / stud if anyone has one.

 

[MG0h3]

I’m sure someone here will chime in with the usual fix.

Prob gonna get a bunch of suggestions on a laser alignment tool as well.


Sent from my iPhone using svtperformance.com

 

[44shelby]

I’m sure someone here will chime in with the usual fix.

Prob gonna get a bunch of suggestions on a laser alignment tool as well.


Sent from my iPhone using svtperformance.com

so, I took off all these hardware store washers and I'll be dammed if the belt don't look 99% better. I still want the oem bolt / stud for the bottom.