brembo caliper parts

[mrt2you]

I searched the forum and didn't get any help.

I was penny wise and dollar foolish.
I ordered brembo calipers to upgrade my billitt mustang front brakes, part # 7r3z-2b121-a and 7r3z-2b120-a.
these are NEW replacement calipers for 07-09 GT500, 4 piston brembo calipers.
the calipers are bare with no pins or anti rattle clips.

I called my dealer looking for replacement pins and anti rattlers. my regular parts guy is on vacation and his replacement is a few cards short of a full deck.

does anybody have the part #'s for these parts or contact info for someone who can help me?

 

[barspen]

Check out AutoZone...http://www.autozone.com/brakes-and-traction-control/brake-disc-hardware-kit-front/ford/mustang-shelby-gt500/2011/8-cylinders-s-5-4l-sfi-dohc-sc

 

[mrt2you]

THANKS for the info.
it looks like they sell the pins and the clip.

I will also need the special bolt that goes thru the center. any leads on that?

 

[CCS86]

Did you find everything?

I'm about to go the same route, and see no part numbers listed through any Ford parts website. I was hoping that the calipers came complete, especially when you have upgrade packages like this, not mentioning anything about additional caliper hardware:

https://fordperformanceracingparts.com/download/instructionsheets/FordInstShtM-2300-S.pdf

 

[CCS86]

So the 4 piston Brembo calipers do come assembled with pistons/seals, bleeders, crossover. But do not come with the anti rattle clip or pad retention pins.

You can order one of these per caliper, and it will include one clip and two pins: 7R3Z 2B164 A