03/04 cobra iron block
03/04 cobra forged crank
Manley Billet I Beam Rods
Forged Diamond Pistons 10.5:1 comp
Total Seal AP Stainless Rings
ARP Main studs
ARP rod bolts
ARP side block bolts
Cometic MLS head gaskets
MMR 7 qt oil pan
MMR windage tray with gasket
MMR pickup tube spacer
MMR billet rear main cover
Melling oil pump with Billet gears
Fully ported and polished heads with 5 miles on them bought from another guys build
9 thread inserts done at time of build
comps springs
comp retainers
New valves
New seals
Bullet custom turbo grind cams
MMR adjustable secondary billet gears
MMR Heavy duty secondary timing chains
New oem ford drivers head tensioner
MMR upgraded passenger side head tensioner
MMR billet tensioner arms for primary chains
MMR primary tensioners
MMR billet primary gear
New oem ford primary chains
MMR billet cam spacers
Sullivan Lower intake
Wrinkle black powdercoated timing cover, valve covers, intake
MMR Back of the head cooling mod
Innovators west 10% overdrive crank pulley
Brand new alternator wrinkle black
I am sure there is more I am forgetting. This motor was specifically setup for a 76mm turbo and E85 and was built to hold 1000hp plus. Any questions feel free to ask.
Will part out if big parts are sold first
Short block with pan, windage tray, billet oil pump, cometic head gaskets, and head studs 5500
Heads complete minus cams and timing parts 3000
Cams 1250
Sullivan intake wrinkle black powdercoated 400
Cg fabrication mild steel hot side black coated 1750 can include brand new ford gaskets and studs with nuts or locking grade 8 bolt kit
I have for sale a complete fast xfi system it has the fast ecu with all the wiring and sensors needed for the 4.6 4v and I also have the xim module that works in conjunction with it with an ls style harness and ls coils that go with it. 2500 shipped for the setup.
Calling or texting will get you the fastest responses. Looking to move this all out. 785-608-9228
03/04 cobra forged crank
Manley Billet I Beam Rods
Forged Diamond Pistons 10.5:1 comp
Total Seal AP Stainless Rings
ARP Main studs
ARP rod bolts
ARP side block bolts
Cometic MLS head gaskets
MMR 7 qt oil pan
MMR windage tray with gasket
MMR pickup tube spacer
MMR billet rear main cover
Melling oil pump with Billet gears
Fully ported and polished heads with 5 miles on them bought from another guys build
9 thread inserts done at time of build
comps springs
comp retainers
New valves
New seals
Bullet custom turbo grind cams
MMR adjustable secondary billet gears
MMR Heavy duty secondary timing chains
New oem ford drivers head tensioner
MMR upgraded passenger side head tensioner
MMR billet tensioner arms for primary chains
MMR primary tensioners
MMR billet primary gear
New oem ford primary chains
MMR billet cam spacers
Sullivan Lower intake
Wrinkle black powdercoated timing cover, valve covers, intake
MMR Back of the head cooling mod
Innovators west 10% overdrive crank pulley
Brand new alternator wrinkle black
I am sure there is more I am forgetting. This motor was specifically setup for a 76mm turbo and E85 and was built to hold 1000hp plus. Any questions feel free to ask.
Will part out if big parts are sold first
Short block with pan, windage tray, billet oil pump, cometic head gaskets, and head studs 5500
Heads complete minus cams and timing parts 3000
Cams 1250
Sullivan intake wrinkle black powdercoated 400
Cg fabrication mild steel hot side black coated 1750 can include brand new ford gaskets and studs with nuts or locking grade 8 bolt kit
I have for sale a complete fast xfi system it has the fast ecu with all the wiring and sensors needed for the 4.6 4v and I also have the xim module that works in conjunction with it with an ls style harness and ls coils that go with it. 2500 shipped for the setup.
Calling or texting will get you the fastest responses. Looking to move this all out. 785-608-9228
