C6 Z06 hard at work.

[Yates...Man]

http://videos.streetfire.net/Player.aspx?fileid=4C47603D-AEB0-4081-96E0-056FC1948B80&term=z06&p=1

Looks like he is having trouble getting into the 11's


and another into the 11's pretty good.

http://videos.streetfire.net/Player.aspx?fileid=B26AC90C-0B38-4FC6-873E-5C4DE59C6BA9&term=z06&p=3

Z06 not faster than the CL65 on the top end.
http://videos.streetfire.net/Player.aspx?fileid=F34F7979-BE80-4427-8F4A-4D36A73346FC&term=z06&p=5

 

[Cahill00SS]

ii believe the benz had a few mods

 

[cobra4b]

That last video was very very cool... that benz must be super fast. The new Z is underated, most are laying down a min of 440 rwhp some in the 460's stock after break-in.

Where's taht video of the silver Z stomping the Gallardo?

 

[GTSpartan]

http://videos.streetfire.net/Player.aspx?fileid=4C47603D-AEB0-4081-96E0-056FC1948B80&term=z06&p=1

Looks like he is having trouble getting into the 11's


and another into the 11's pretty good.

http://videos.streetfire.net/Player.aspx?fileid=B26AC90C-0B38-4FC6-873E-5C4DE59C6BA9&term=z06&p=3

Z06 not faster than the CL65 on the top end.
http://videos.streetfire.net/Player.aspx?fileid=F34F7979-BE80-4427-8F4A-4D36A73346FC&term=z06&p=5

That CL65 had ~650rwhp. A flash and exhaust is way more than what you would think, but with those cars it's a lot.

 

[METALBEAST]

That first video looked like it was at Bowling Green. I wish the camera man had zoomed in on the times.

 

[brab]

That CL65 had ~650rwhp. A flash and exhaust is way more than what you would think, but with those cars it's a lot.

It's pretty much impossible that it had ~650 rwhp...not without a different tranny....actually is it but it won't last very long...

They come with 604 at the crank from the factory and 738 ft-lb torque.....
It's purposly detuned from the factory because it's about the maximum torque the tranny will take...about 1000nm....

I've read that on Mercedes forums..

 

[GTSpartan]

It's pretty much impossible that it had ~650 rwhp...not without a different tranny....
They come with 604 at the crack from the factory and 738 ft-lb torque.....
It's purposly detuned from the factory because it's about the maximum torque the tranny will take...about 1000nm....

No it's very possible. A guy known as Treynor, who posts on here once in a while has one with a chip and tune and it is in the ~650rwhp. Just because the factory can't warrant the tranny with any more power doesn't mean that the motor can't be modded. That car is definately over 600rwhp. Search around for it, it is well known. :beer:

 

[Machinator]

Wow, 7liters is a nice thing.

 

[fastball19]

Zo6's Blah...

 

[Stopsign32v]

Not bad...would love to run one of them at the track with my stock bottem end 99 Cobra.

 

[UtOhCop]

It looks like GM just bought an SRT-10 viper and just made a copy of the front end.

 

[zerocool]

Except that their version of the Viper is much easier to live with and is much faster.

 

[cobra4b]

It looks like GM just bought an SRT-10 viper and just made a copy of the front end.

No.... wrong. I've been in both cars. Not at all alike in person.

 

[UtOhCop]

No.... wrong. I've been in both cars. Not at all alike in person.

I was kidding. :-D

 

[cobra4b]

I was kidding. :-D

Well then put a or something up... sarcasm doesn't translate on the interweb :loser: :beer:

 

[shawnsvtcobra]

I like em both.

 

[new2BIGPAR]

That first video looked like it was at Bowling Green. I wish the camera man had zoomed in on the times.

Good eye. :thumbsup: That is Beech Bend raceway. It's just a couple miles form the Corvette plant.