Cleaning IMRC

[WGUNGHO]

Is there a way to clean the IMRC without removing the intake?
Thanks
Thom

 

[97/4.6w/fangs]

http://www.svtmustangcobraclub.com/media/pdfs/tech/IMRC_Cleaning.pdf

 

[bssmith1220]

seafoam...but its not as good as manually cleaning them.

 

[RoadZOmbie]

You can use Sea Foam but it will not clean it how we'd all like. It will only loosen up what it touches and that is very minimal. After Sea Foam you will see a small increase in performance for a few days then back to bog because of oil build up. Best way is to do a manual cleaning and install oil catch cans/bottles.

 

[MouTine]

 

[Gallows]

You can use Sea Foam but it will not clean it how we'd all like. It will only loosen up what it touches and that is very minimal. After Sea Foam you will see a small increase in performance for a few days then back to bog because of oil build up. Best way is to do a manual cleaning and install oil catch cans/bottles.

It's not really a big job to take them off and clean them properly. http://www.svtmustangcobraclub.com/media/pdfs/tech/IMRC_Cleaning.pdf

 

[94GTSTANG50]

Easy job to clean them, just takes about a day or two if you take your time. The difference is very noticeable too. Seafoam didn't do anything compared to the difference taking them apart does.