Cleaning out the garage *FREE STUFF*

[bttlfed98gt]

Ok guys, some of you may know im getting out of the mod motor game. These are the things I have acquired over the years. Some of this stuff ill let go for free if you pay shipping.

Just a brief run-down and ill add more as I think of it all

Ive got

• • 2 4v Harmonic Dampners
  • 2v/4v/ Chain Guides
  • Complete set of 4v lifters/followers
  • 2v IAC with -10 Male Welded on for Braided IAC Line (Really cleans it up and i have the SS line with a -10 90* and 45* fitting on it. All you would have to do is weld a bung on your piping. This worked flawlessley on my turbo 2v
  • Various IAC Valves 2v 4.6/5.4 truck or car
  • Low Low mileage timing chains and tensioners (sub 5k)
  • 2v Exhaust Manifolds (used with a Gen 1 ON3 kit)
  • 04 Cobra Exhaust Cams
  • Tons and Tons of bolts
  • ^ Have all different sets (WP, covers, intake etc)
  • 2v 1 Bolt Timing Chain Cover (x2)
  • 2v Alternator off a PI Car
  • 4v secondary Chains/Tensioners/Gears
  • 2v/4v Crank Trigger Wheels
  • Cobra Crank that could use a polish (make offer)
  • Fresh machined 6 bolt GT CAST Crank .10/.10 Also have brand new main/rod bearing to go with it. King Brand*
  • 8 Bolt CAST Crank(ready to rock**)
    4v Cobra pick-up tube
    Crank Sensors and Cam Sensors (x5 of each)
    Low Mileage 2v Oil Pump OEM Ford
    2v Water Pump w/ pulley 28k miles
    Rear Main Seal Cover
    Driver Side Motor Mount- Excellent Shape
    1999 Cobra Fuel Rails (OEM) with FRPS and 24# Injectors
    SCT 4 Bank Chip/flipswitch
    
    
    1999 Cobra Shortblock with 34k on it (Make Offer)
    I will help with shipping^

There is more on my shelves but thats all I can think of at the moment

Like I said earlier- bolts and little stuff ill just let go for cheap or free (as long as you pay shipping)
I'd rather help someone out in a pinch, rather than just scrap everything from the get go.

Everything else will be cheap. Not looking to make a ton

Here's a picture of the IAC Setup

 

[Mizark347]

PMed

how much for:

2v/4v/ Chain Guides
Complete set of 4v lifters/followers (only need 16 for 2v)
Low mileage timing chains and tensioners
2v 1 Bolt Timing Chain Cover w/ bolts
2v/4v Crank Trigger Wheel
1 Crank Sensor and 2 Cam Sensors
2v water pump w/ bolts

shipped to 48009

Thanks!

 

[bttlfed98gt]

PM replied!

 

[bttlfed98gt]

Ttt! I will post pictures of the cobra short block tomorrow

 

[luke1333]

the cobra motor is free just pay shipping?

 

[03cobraracer]

still got the 04 cobra exhaust cams? shoot me a PM with info on those. thanks

 

[bttlfed98gt]

the cobra motor is free just pay shipping?

Hahahah, ill make you a deal! If you buy the shortblock ill split freight with you

 

[bttlfed98gt]

still got the 04 cobra exhaust cams? shoot me a PM with info on those. thanks

Yes sir, pm sent!

 

[bttlfed98gt]

All pm's have been replied to! Thanks for the parts purchased thus far. Still have a bunch of guides, chains left as well as other misc stuff

 

[bttlfed98gt]

Sold some more stuff today! Also have 1 side of 4v valve cover gaskets with the spark plug tube seals as well, got some 3 valve intake gaskets and valve cover gaskets, couple IAC valve gaskets, tons of bolts, 2 2v oil pumps with pickup tubes, single bolt timing cover for a 2v I NEED SHELF SPACE so lets get this stuff gone lol

 

[bttlfed98gt]

ttt

 

[1 srt4 U]

Looking for oil filter housing from 01-04 shipped to 76643 thanks

 

[2001Bullitt]

That IAC valve with the fitting welded on in good condition? I have a Bullitt with the On3 kit and I had an issue with it popping off so now its all clamped and looks like crap. Shipped to 01852?

 

[bttlfed98gt]

That was my problem ^

Sorry man, its sold