• Welcome to SVTPerformance!

Clutch Advise

Discussion in 'Driveline' started by Palacios289, Nov 29, 2018.

  1. Palacios289

    Palacios289 Active Member Established Member

    Messages:
    121
    Joined:
    Dec 11, 2003
    Location:
    Duarte, CA
    good afternoon. I took advantage of the sale at Lethal for black friday. I went with McLeod 26 spline street extreme, new 26 spline input shaft, McLeod flywheel, all new bolts and ford pilot bearing. Is the Mcleod throwout bearing a quality piece? i've used a ford motorsport bearing before and it was a little on the loud side.
     
  2. 03 Indy Cobra

    03 Indy Cobra Well-Known Member Established Member

    Messages:
    2,678
    Joined:
    May 30, 2005
    Location:
    Indiana
    I would go with the Ford Racing throw out bearing. This seems to be the one most Cobra owners go with.
     
    me32 likes this.
  3. Palacios289

    Palacios289 Active Member Established Member

    Messages:
    121
    Joined:
    Dec 11, 2003
    Location:
    Duarte, CA
    thanks. Ill go ahead and order.
     
  4. 03 Indy Cobra

    03 Indy Cobra Well-Known Member Established Member

    Messages:
    2,678
    Joined:
    May 30, 2005
    Location:
    Indiana
    No problem. The Ford Racing one seems to be higher quality and last longer then the others.
     
  5. Palacios289

    Palacios289 Active Member Established Member

    Messages:
    121
    Joined:
    Dec 11, 2003
    Location:
    Duarte, CA
    Anything else I should look at replacing? Total miles are 61k. Cable seems good. My cobra has the low pedal mod and firewall adjuster. I also bought a billet throw out bearing tube.
     
  6. Bdubbs

    Bdubbs u even lift bro? Established Member

    Messages:
    13,219
    Joined:
    Jan 8, 2010
    Location:
    MN
    Sounds like a good list. Maybe consider the head cooling mod if you don't have one.

    Sent from my Moto E (4) Plus using the svtperformance.com mobile app
     
    me32 likes this.
  7. scottydsntknow

    scottydsntknow Active Member Established Member

    Messages:
    960
    Joined:
    Oct 18, 2007
    Location:
    Rota
    Pivot ball and fork while you are in there is always a good idea. Head cooling mod while the trans is out if you want one of the ones that uses the rear plug. But you can get a Lethal Gen2 kit that uses the top freeze plugs so you can install that whenever.

    McCleod TOBs are actually really good, if you already got the FRPP one then whatevs but I would have just ran the McCleod.
     

Share This Page