I know I had these on here before and decided to keep them but I ran into another problem and have decided to abandon them. So here they are for all to see and hopefully buy. Inner CVS are brand new and never installed, just a couple marks from tools. Halfshafts themselves are Level 5's and solid. Grease is good to go on all of them and will come with an extra set of boots as seen in the pictures.
Now heres the problem, the Hub teeth need to be machined....or if your really good at it, you can file it down. Regardless, I talked to DSS and to have them do it would be $300 from your door to them and back. Other than that, they are very solid parts and should serve someone who wants to take care of the Hubs well. Just not me.
Asking $1550 obo plus half shipping (which is about $40-50 usually), these are capable of around 1000-950rwhp
Now heres the problem, the Hub teeth need to be machined....or if your really good at it, you can file it down. Regardless, I talked to DSS and to have them do it would be $300 from your door to them and back. Other than that, they are very solid parts and should serve someone who wants to take care of the Hubs well. Just not me.
Asking $1550 obo plus half shipping (which is about $40-50 usually), these are capable of around 1000-950rwhp
Last edited: