Complete M122 Swap Kit blower&plate

[Buckachow]

I have a M122 blower with 12,000 miles on it. The blower was taken off and replaced with a KB by the original owner. The blower has Tape sealing the outlet and inlet.

I have one of the 1st tgarlock adapter plates. It comes complete with bolts and gaskets. It will fit all bolt pattern for 99-00 and 01-04 lightning lower intakes.

I also have a 4'' aluminum tube and all silicon boots to make a cod air intake.

Everything is here to bolt down and go. Use your tb, your maf, and air filter.

Asking $1600 shipped obo

IAC adapter

This is the plate. I placed my 99 blower gasket on it to verify the bolt pattern was correct. It is drilled to fit the 01-04 blower pattern as well

 

[Buckachow]

Bump

 

[01GT5.4]

I'm interested in the kit but the adapter kit goes for $565 and a used m122 goes for $500. Is there another piece I'm not thinking of, that you have?

 

[tgarlock]

I'm interested in the kit but the adapter kit goes for $565 and a used m122 goes for $500. Is there another piece I'm not thinking of, that you have?

He has the parts you need to build an air inlet, a little fabrication and his kit is almost 100% complete.

 

[Buckachow]

I'm interested in the kit but the adapter kit goes for $565 and a used m122 goes for $500. Is there another piece I'm not thinking of, that you have?

I have everything needed to bolt on and go with the kit. Just need to use your tb and maf with a filter.

The price is obo too, so let me know where you are and I will get an idea on shipping and we can try see if we can make something work

He has the parts you need to build an air inlet, a little fabrication and his kit is almost 100% complete.

Thank you. It is a very nice kit. I wish I could have gotten some numbers for you.

 

[01GT5.4]

I'm out of Central Florida, 32763. Pm me your bottom dollar and maybe we can work something out.

 

[01GT5.4]

I am interested in the adapter kit if you want to separate it.

 

[Buckachow]

$1400 obo

 

[wallywagon]

What is the HP gain from doing this? stock pulley for stock pulley?

 

[Buckachow]

What is the HP gain from doing this? stock pulley for stock pulley?

One guy made 426hp to the wheel on a stock lightning with this kit and a tune. So figure around 60hp to the wheels. Potentially more with a built motor and pulley changes

 

[Buckachow]

Bump

 

[chorizo84]

kit

Hey man shoot me a message please I want to try to work a deal with you, thanks

 

[Buckachow]

Hey man shoot me a message please I want to try to work a deal with you, thanks

Sent you a message