So, I've finally made the decision to swap over to COP for my 98 Cobra due to the fact that it needs a tune up and rather try and kill two birds with one stone ($120 for wires from Ford Racing, and another $150 for coil packs, I rather clean up the engine bay at the same time with new COP 's and no spark wires), but am a little skeptical to everything that is needed for the swap. As far as I can tell, this is what I think I will need:
-COP swap harness
-COP's (from what year Make and Vehicle COP can I use? 99-04 4v or can I use 2v's?)
-99-04 4v Valve Covers (I already have these Powder Coated Ford Racing Wrinkle Blue)
-Valve Cover gaskets (can I re use mine or are my 98 gaskets different?)
-Spark Plug tube gaskets
-Currently running NGK TR55's in the car gapped at .46. Is that ok?
Any help is appreciated.
Thank you
-COP swap harness
-COP's (from what year Make and Vehicle COP can I use? 99-04 4v or can I use 2v's?)
-99-04 4v Valve Covers (I already have these Powder Coated Ford Racing Wrinkle Blue)
-Valve Cover gaskets (can I re use mine or are my 98 gaskets different?)
-Spark Plug tube gaskets
-Currently running NGK TR55's in the car gapped at .46. Is that ok?
Any help is appreciated.
Thank you