Correct belt size?

[Cobi-Wan]

I have a 99 cobra with stock pulleys and a P1 that I'll be running a 3.0" Reichard ultra-grip. Can anyone tell me what size belt I should be running?

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[Black*Death]

I run a 2.95 " pulley on my 99 Cobra with a P1SC stock pulleys.

I use a 112" gator back belt with no slippage noted. I usually buy them off of Summit for $30.00 but have seen them for cheaper.

 

[Brutal Metal]

I agree 112", a 113" will work but the belt wrap won't be as snug.

 

[blownstang4.6]

Get the tightest belt possible. Im sure the Vortech pulley setup is a little different but I run a Gates 111" on my Mach with a 3.12 pulley.

 

[2001SilvrGT]

i just ordered a 3.4 pulley for my p1 for my 99 cobra you guys think a 113 will work? 6 rib stock pulleys

 

[Brutal Metal]

i just ordered a 3.4 pulley for my p1 for my 99 cobra you guys think a 113 will work? 6 rib stock pulleys

Yes.

 

[SuperMach1]

I need some help here also. I have a 99 Cobra timing cover with a P1 ProCharger running a 3.8 pulley and a 10% Overdrive balancer. I was thinking maybe a 115" belt?