Custom Intake Tube for Turbo or Blower car

[KingKiller]

I have a custom intake tube that would be a serious convenience for anyone doing a custom turbo kit on their car. Between the cost of the blow-off valve v-band flange (designed for a TiAL BOV), the slot-style MAF flange, the piping, the coupler, the t-bolt clamp, and the fabrication, it could easily cost $200+ to reproduce this piece. I will let it go for $100 shipped to anyone who needs it. Any questions just ask.

Thank you.

 

[static74]

Image doesnt work

 

[KingKiller]

Image doesnt work

How about now? Should be fixed.

 

[KingKiller]

to the top!

 

[4to8]

what size is the round of pipe

 

[KingKiller]

what size is the round of pipe

3". I still have the blow-off valve available too, currently listed on eBay: Tial BV50 50mm BOV BV 50 mm Blowoff Valve Blow Off Blow Off | eBay

 

[KingKiller]

bump it up!

 

[slowcobra97]

What yeah did u have this on. I need something like this for my 96 cobra if the tb angle is correct

 

[KingKiller]

I had this on an 04 Cobra with a Mach 1 intake manifold. I'm not 100% whether the change in angle with the 96 intake would work or not.

 

[KingKiller]

bump it up!

 

[KingKiller]

to the top!

 

[scottbrunner]

How well did the mass air work being so close. To the throttle body

 

[KingKiller]

How well did the mass air work being so close. To the throttle body

No problem. I put roughly 5,000 street miles on that setup, no tuning issues. I also went 9.90@141.

 

[4to8]

Ill take it it'll work fine for me and your BOV most likely

 

[KingKiller]

Sold!