Would the CJ baby cam for exhaust and LM Intake cam work well together, something close to Comp Cam Stage 3 but safer at high RPM?
Sent from my SM-G900P using Tapatalk
Yes
The car tested had the 13MM 290 SCJ cams, so yes they work well together.
Would the CJ baby cam for exhaust and LM Intake cam work well together, something close to Comp Cam Stage 3 but safer at high RPM?
Sent from my SM-G900P using Tapatalk
So were the gains from swapping in both the LM Intake and the CJ exhaust cams, or was it already full Cobra Jet cam setup and you just swapped intake (I'm guessing it is since Boss intake cam is 12mm and not 13mm)? If it was full CJ before and you gained 15hp, that's even better for a stock GT or Boss. If I recall correctly, the exhaust cam was the more restricrive of the two on the coyote?Yes
The car tested had the 13MM 290 SCJ cams, so yes they work well together.
Mr shaun i got a cpr turbo kit can i use this cam and leave exhaust cam stock ???
So were the gains from swapping in both the LM Intake and the CJ exhaust cams, or was it already full Cobra Jet cam setup and you just swapped intake (I'm guessing it is since Boss intake cam is 12mm and not 13mm)? If it was full CJ before and you gained 15hp, that's even better for a stock GT or Boss. If I recall correctly, the exhaust cam was the more restricrive of the two on the coyote?
What is the duration for the LM intake?
Will it take kindly to spray and timing retard?
Sent from my SM-G900P using Tapatalk
Mr shaun do i have to use cam Limiters??
With this new L&M intake cam are gears needed such as 3.73 or do 3.31/3.55 work as well
Also, what is the part number for the cj exhaust cams? I'm finding multiple numbers.
Are the baby cj cams worth it over the other cams that come as a complete set of 4?
I bought my set for $159 and made 466 rwhp on 91 oct on AED's dyno.
.........where did you buy them? I just dropped off my block to Tim over at MPR yesterday and might as well throw a set in there if they are that inexpensive.
Update: Cams are in! Took a few days as I was doing opg's, valve springs, and the baby cj exhaust cams at the same time. Shaun sent me a base tune and I have it logged and done. He sent me the updated tune yesterday afternoon so all that's left is to upload it to the car and head To a dyno! Initial impressions are there are no drivability concerns with these cams. Car runs perfect. Felt stronger on the base tune. Can't wait to see what it does with the update and e85.
I'd be interested in a group purchase.I would like to know the possibilities of a group purchase on a set of these. I have a set of the baby cobra jet cams taking up shelf space, and this is the motivation I needed to get the job done.
Anybody have someone's ear at L&M that could maybe get this done?
I'd be interested in a group purchase.
Sent from my SM-G900P using Tapatalk