Did a homemade head port. NEED HELP!

Status
Not open for further replies.

OneSlowCobra

JackStand Racing :(
Established Member
Joined
Dec 19, 2010
Messages
610
Location
Michigan
Hey guys, I've got a 98 1.8T. I've had a air filter and chip for a while and wanted to get more performance. I was recommended to port and polish the intake and exhaust. We found out they used abrasive material to do it like gritty sand. So I got with my friend that tunes Hondas and we decided to try it ourselves. We got a bag of sandblasting sand and hooked up into the intake and started the car. We had to hold the gas so it would run. He wanted to let the engine suck in the sand through the intake so it would port it out and then push it out the ehxaust so it would port the exhaust manifold.

I was worried that it might cause problems but he figured it'd be OK as long as we didn't make boost and it get sucked in the turbo. After running the car and letting it suck in sand we got about half way through a 25 lb bag. The check engine light was on and the engine was bucking and kicking and sounding really weird. We stopped and hooked the car back up normal and took off the sand supply. We tried to start it again and it was really hard. Once started it couldn't idle and kept making weird noises. We took it out and drove it and it started to make scraping and knocking noises.

Help! Can anyone tell me what to do! My buddy only does Hondas so he doesn't know much about Audis

This is the only pic i have the whip
303199421.jpg
 

OneSlowCobra

JackStand Racing :(
Established Member
Joined
Dec 19, 2010
Messages
610
Location
Michigan
Its not funny. This is my only ride and i need to get it back in running order.
 

dks

Member
Established Member
Joined
May 11, 2005
Messages
157
Location
L.A., CA
Trolling.

[ame=http://www.audiforums.com/forum/showthread.php?t=80267]Hey guys, please help with my mods gone wrong..... - AudiForums.com[/ame]
 

GoatSlayer

Banned
Joined
Jun 16, 2010
Messages
964
Location
Goat Land
I dont know nor understand what you guys were porting. But you should have shipped that thing to POSI!
 

OneSlowCobra

JackStand Racing :(
Established Member
Joined
Dec 19, 2010
Messages
610
Location
Michigan
dam you. Why ruin it.

I was just gonna ask if should i put water in it and rinse it out?
 

lobra97

PIITB since 1984
Established Member
Joined
Aug 31, 2008
Messages
10,874
Location
210
hopefully it'll cost you alot to fix
 
Status
Not open for further replies.

Users who are viewing this thread



Top