Do i need to lower my front mount

[Mr.GSXR1000]

I got my car back and the front mount looked like this. I didnt know how restrictive the bumper and support was. Just asking. I guess at the worst ill have cold side remade and i/c dropped , hope not but if so i guess i will. Let me know what you all think. If i have to drop it what did you do with your power steering cooler

 

[whtcobra1998]

dam wheres the air flow to it, mine sits at the bottom of the core support, I cut the back half and lower section of the bumper support out for air flow and left the foam on the outside to build that high pressure zone, as for the p/s cooler leave it behind the i/c or can do what i did on the same side as your trans cooler, trans cooler, 10"fan than a small trans cooler for the p/s. the fan moves air through both of them

 

[ruthless]

Is that front mount that small or is half of it behind the bumper support?

 

[Mr.GSXR1000]

naw its not that small. you can see it up in the grill by the snake. I think im just going to redo the cold side.

 

[rtusnake]

Just make you a tubular bumper support. Lost weight and free up airflow. Cheaper than redoing the piping. Here is mine

http://s62.photobucket.com/albums/h85/rtusnake/?action=view&current=007-7.jpg

 

[Mr.GSXR1000]

Just make you a tubular bumper support. Lost weight and free up airflow. Cheaper than redoing the piping. Here is mine

007-7.jpg picture by rtusnake - Photobucket

im still going to have to lower it some to make it look good. But id like to do that tubalar support, do you have anymore pictures you could send to [email protected] so i can print off and take it to my fab guy. Thanks