Do you have to roll the fenders with 335's

[moddedmystic]

I just got a set of 17x10.5 cobra replicas for my 04' and was wondering if you have to roll the fenders to fit the 335's? I've read alot of posts about them so far and they've all pretty much said the same thing. You need to run a 1/2 spacer,longer studs,and either grind the IRS bolt or replace it with the one from MM. But they dont really give a definitive answer when it comes to the fender issue. Any help you can give me would be welcomed!

Thanks, Mark

 

[hawaiiancobra]

afs 17x10.5 michelin ps2's 335/35-17 car with race springs lowered 1-1/2"
have button head bolt,dont think its necessary with this set-up, irs mounting bracket is issue without spacer,, 3/8"spacer a must, when car bottoms out on bumps tires rub fenderwell. yes i do need to roll my fenderwells, only occassionally does it rub,it is damaging my tires, it rubs just enough to make it an issue

 

[04Cobra23]

Just run BFG DR 315's there big enough. 335's IMO stick out and dont look right.. I would assume rolling the fender would not totally fix the problem it will still rub.

 

[Sonic605hp]

I'm doing 19x9.5 in the back with 295's do you think those will rub??? will i need spacers??

 

[04Cobra23]

With the right rim offset it will not rub. I am running 18x11 with 315BFG DR and they dont rub at all.

 

[mblgjr]

Simple: Don't run 335's unless you have an 11" wheel.