• Welcome to SVTPerformance!

Don't let this happen to your 3.5L!

Discussion in 'Taurus SHO' started by Livernois Motorsports, Jan 20, 2017.

  1. Livernois Motorsports

    Livernois Motorsports Authorized Vendor Authorized Vendor

    Messages:
    1,031
    Joined:
    May 28, 2013
    Location:
    Dearborn Heights, MI
    Starting with a great foundation is the way to build solid home that will stand for years to come. This is the same aspect when it comes to your motor, especially your 3.5L EcoBoost motor.

    Take a look at the photos and see what happens when a stock block is pushed to the breaking point. The stock metals constructed to form the stock rod is not strong enough to handle the added boost and engine rpm. So in-turn they will crack and continue to spin inside the block causing the block to crack and even holes in the walls of the block. This is absolute catastrophic failure and will be costing you a boat load of cash!

    One way to avoid this from happening and making your wallet very sad is to start with a great foundation as explained with the home example. When you are looking to push anywhere from 450 or more wheel hp/tq a new piston and rod is necessary. Here at Livernois Motorsports we have developed a solution for this issue. After many years of testing and building EcoBoost motors, we have seen all of the breaks, cracks, and destruction that could possibly happen to these blocks. That is why we have one of the best kits on the market. The Powerstorm Ultra High Performance rods and Powerstorm Ultra High Performance pistons are the best starting point. They will be able to handle all the power you can throw at them, being constructed of 4340 aircraft quality vacuum degassed rods and 2618 forged pistons.

    During this process, we highly suggest to add in a set of Powerstorm Oil Pump gears made of 4140 chromolly steel. This will eliminate the possibility of the stock oil pump gears breaking with added crankshaft vibration, a very common cause of failure.

    Below is a list of our product lines like Powerstorm pistons, rods, and short blocks!

    Powerstorm Ultra High Performance Rods - http://www.livernoismotorsports.com/product/LPP710100
    Powerstorm Ultra High Performance Pistons - http://www.livernoismotorsports.com/product/LPP720110
    Powerstorm Billet Oil Pump Gears - http://www.livernoismotorsports.com/product/LPP701141
    [​IMG]

    3.5L Block with Holes 013 SMALL (1).jpg
    3.5L Block with Holes 009 SMALL (1).jpg
    3.5L Block with Holes 005 SMALL (1).jpg
    3.5L Block with Holes 002 SMALL (1).jpg
     
    jmsa540 likes this.

Share This Page