Door panel trim

[NEOH1]

Hi guys,

Where is the best place to get the passenger side door trim piece?:shrug:

Are they the same as a regular Mustang? If yes, what year range is good?

Thanks,
Neil:burnout:

 

[93KingCobra]

Hi guys,

Where is the best place to get the passenger side door trim piece?:shrug:

Are they the same as a regular Mustang? If yes, what year range is good?

Thanks,
Neil:burnout:

The 93 Cobras came with Opal gray interior so some years will not match..

The place's I would recommend would be www.50resto.com, http://www.mpsautosalvage.com/

 

[93SVTCobra]

http://cgi.ebay.com/ebaymotors/1993...017QQitemZ270173152484QQrdZ1QQsspagenameZWDVW

 

[NEOH1]

Thanks guys, but I should have clarified better.

I need the EXTERIOR door trim piece that runs horizontally along the middle of the door.

 

[cobra186]

The wide side/door moulding is the same from 87-93 GT or 93 Cobra........ LX is different.

Getting a used one to restick is very difficult. They have an aluminium backing that gets stretched during removal and they will not lay flat again. Some people take the alum. backing off and then reglue but to me they never look right and usually fall off in time.

New ones were still available in limited quanities from 50resto last I checked, but they are not cheap anymore.

 

[coupe5.0]

If you can find a used one i have had pretty good luck getting them off with a piece of piano wire, just saw the double sided tape, it takes a while but works.