i can not get this thing back on. i have already ripped a chunck off the top near the tweeter. the foam on the inside is falling off too. i wish it just had the plastic screws, like every other car in the world. i cant get all of the brackets to fit in the holes at one. any tips or do i need to go to ford and have them do it? please help
door skin install URGENT
- Thread starter tigerwoods
- Start date
You probably already got it figured out, but the first thing to do is relax... it will go back together.
First, put the pin for the door locks through the skin, then line up the holes for the bottom clips with the door. Once they are lined up, put the skin flat to the door and push in and down at the same time. All of the clips should go in without a problem. Then just pop in the plastic pin at the bottom of the door, and reinstall the armrest and controls. Just be careful and take your time.
First, put the pin for the door locks through the skin, then line up the holes for the bottom clips with the door. Once they are lined up, put the skin flat to the door and push in and down at the same time. All of the clips should go in without a problem. Then just pop in the plastic pin at the bottom of the door, and reinstall the armrest and controls. Just be careful and take your time.
Users who are viewing this thread
