Drag wheel question...

[1cln50]

What big and little set up will work without grinding on the rear brakes? I know a 17-4.5 upfront , but ive seen/read that a 15-8 with a 5.5 BS will clear fine, and also a 15-10 with a 6.5 BS but you might have to grind the banjo bolts a little.

Does anyone have any pics of said set ups? I'm also riding on H & R SS springs so if need be ill swap springs to expand my options.



THanks guys !!

 

[1cln50]

no one???


nobody has big and littles on stock mach 1 brakes??

 

[mr-proper]

check out my thread. answers your questions

http://www.svtperformance.com/forums/showthread.php?1064920-cammed-mach-1-weld-rts-content

 

[2004azuremach]

If you wanna go 15's front and rear check out Bogarts. There pricey thou

 

[Explosive]

The 17's are fine in the front, the 15's will fit out back but damn its close. I'm gonna pick up stifflers brake lines for mine since they dont have the large block where the banjo bolt attaches. Hope this helps.

 

[Explosive]

 

[1cln50]

thank you guys!! and i would run 17s in the front to not have to change out the big brakes. Explosive, thanks man thats what i was wondering. Are those 15-10's? what backspace?

 

[1cln50]

@ mr proper, i appreciate that also man!!! thanks fellas, looks like im gonna sell my street wheels and try to get a set of welds

 

[Explosive]

Those are the 15x8's from American Muscle. I want a 10 but dont want to grind

http://www.americanmuscle.com/racestar-15x8-9404.html

 

[Explosive]

Here you can see the difference it the brake lines. Not sure if these alone would let you fit 10's but I'm not gonna push it yet.

 

[1cln50]

sweet man!!! makes me want drag wheels lol, wayyyyyyy more affordable than the weld RTS wheels.