Need some help guys. What do I need to do to use dual 03 cobra pumps? Do I have to buy a terminator tank? Can I mount them using my 99 cobra fuel pump assembly or what needs to be done. Thanks!!
dual termi pumps HELP
- Thread starter 1999 SVT Cobra
- Start date
You will need to modify the "sump" or get a terminator tank.
Thats what I thought. Can I run the pumps side by side in my 99 cobra fuel pump assembly? Also does anyone know what the cost is for a new/used termi tank?
Is a fpdm from a termi needed?
you can run the termi pumps with your existing tank. I have been this way for 5 yrs. The only down side is that the 99/01 tank doesnt have a baffle like the 03/4 tank.
This causes issues when you accelerate/brake and the fuel slooshes; making the pumps go dry and running into a lean condition.
Since my car isnt my daily my rule of thumb is to not go below 1/2 tank of fuel.
If you use your existing tank you need to break away the bucket that your current pump sits in and use the 03/4 hat and pump assembly.
I believe you can find the 03/4 pumps and tank for about 700$. Look around.
-Paul
This causes issues when you accelerate/brake and the fuel slooshes; making the pumps go dry and running into a lean condition.
Since my car isnt my daily my rule of thumb is to not go below 1/2 tank of fuel.
If you use your existing tank you need to break away the bucket that your current pump sits in and use the 03/4 hat and pump assembly.
I believe you can find the 03/4 pumps and tank for about 700$. Look around.
-Paul
no i use my stock one with a BAP, on my 100 octane tune i put down 602hp at the wheels with no issues.
-Paul
Im kind of a newb to this so thanks for the posts. Whats a fpdm?
fuel pump driver module
Users who are viewing this thread
