Dyno Day?

BigHuge

Big Huge SVT Poster
Established Member
Joined
May 4, 2007
Messages
149
Location
Marysville, Wa
Dyno Day Saturday August 25th

Just a heads up for everyone. We have a DETOUR just before the Hobart store/post office. Here are the directions around the DETOUR as follows:

Coming south on the Issaquah-Hobart Rd follow the DETOUR sign on to Hwy 18
Follow the DETOUR sign and take the 244th Ave SE exit.
As you wrap around the exit and come to 244th Ave SE do not follow the DETOUR sign.
Turn left onto 244th Ave SE.
Then turn right onto 200th St SE – 200th St SE will take you back to the Issaquah-Hobart Rd.
Turn right onto the Issaquah-Hobart rd – You will see the Hobart store and post office.
Turn left onto 204th St SE – At the end of 204th you will see the Horse Power Ranch sign.

Coming out of Auburn on Hwy 18:
Take the 244th Ave SE exit.
Turn left onto 244th Ave SE.
Then turn right onto 200th St SE – 200th St SE will take you back to the Issaquah-Hobart Rd.
Turn right onto the Issaquah-Hobart rd – You will see the Hobart store and post office.
Turn left onto 204th St SE – At the end of 204th you will see the Horse Power Ranch sign.

Updated List as of 8-25-07

Dyno Day Set for Saturday August 25 th.

Start time 9:00 AM

2-3 pulls for 60.00
Owner can drive his own car.
Also if we have time John will set aside tunning time.
We need to have 10 to 18 cars.

So far we have:
1- Shznit - 04 Cobra
2- 352 ford - 94 Cobra
3- Saleen09 - 03 Cobra
4- Bighuge - 03 Cobra
5- Bill89Saleen304 - 89 Saleen
6- 4rdsvtdriver - 04 Lightning
7- Red04GT - 04 GT
8- 2bfeard - 06 Mustang
9- Saleen #468 - 2005 S-281
10- 2bfeard - 04 Cobra
11- Lethal SSVT - 03 Cobra - TENTATIVE
12- 04MystiCobra - 04 Cobra - TENTATIVE
13- Schropper - 03 Blk Vert - TENTATIVE


This is the e-mail I recived from John today.

The 25th does work. I like to get at least 10 cars and as many as 18.
The cost is 60 for 2-3 pulls per car with wide band. The owner does
normall drive the car on the dyno. If we have time we can allow some
tuning time for those who can.
 
Last edited:

shznit

shznit
Established Member
Joined
May 2, 2005
Messages
363
Location
Renton, WA
I'm down... I want to run sooner than that but I'm still sorting through a few tuning issues & some body stuff on my car... I'm definitely heading to HP Ranch though.
 

coolguy10786

Active Member
Established Member
Joined
Jul 23, 2005
Messages
2,682
Location
US
As long as my car is done by then, i would be down.
 
Last edited:

saleen09

Slow A$$ Kenne Bell Cobra
Established Member
Joined
Aug 26, 2004
Messages
2,041
Location
Seattle, Wa
Might be interested. Need to see if my tuner could work with the date/time.

ANy pricing?
 

Oxford Snake

Active Member
Established Member
Joined
Sep 28, 2003
Messages
2,161
Location
S Florida
Does the owner allow you to make your own pulls? What about pricing on renting the dyno based on time? I do all my own tuning so I just need the dyno time.

Thanks,

Dave
 

BigHuge

Big Huge SVT Poster
Established Member
Joined
May 4, 2007
Messages
149
Location
Marysville, Wa
Dyno Day Set for Saturday August 25 th.

Start Time is 9:00am

2-3 pulls for 60.00
Owner can drive his own car.
Also if we have time John will set aside tunning time.
We need to have 10 to 18 cars.

So far we have:
1- Shznit
2- 352 ford
3- 99 GT tony
4- Oxford Snake
5- Bighuge
6- Saleen09 - TENTATIVE
7- Coolguy10786 - TENTATIVE

This is the e-mail I recived from John today.

The 25th does work. I like to get at least 10 cars and as many as 18.
The cost is 60 for 2-3 pulls per car with wide band. The owner does
normall drive the car on the dyno. If we have time we can allow some
tuning time for those who can.
 
Last edited:

Oxford Snake

Active Member
Established Member
Joined
Sep 28, 2003
Messages
2,161
Location
S Florida
I was just posting a few questions. I am still waiting on my fuel hat to arrive and then need to wire up the GT pumps and 2nd fpdm. Once it is running I still have to put 4-500 miles on the new clutch. I will let you know where I stand mid August.

Dave
 

painintheass

New Member
Established Member
Joined
Mar 11, 2006
Messages
344
Location
WA
Shoot if its Maple Valley, you can put me down for a tune. I could really use one on this stock ride. What would the cost be for a tune aways, thanks. :) I can get a few other people if you don't mind some SVT focuses.

Again thanks
 

BigHuge

Big Huge SVT Poster
Established Member
Joined
May 4, 2007
Messages
149
Location
Marysville, Wa
Here's the updated list of cars going.

Dyno Day Set for Saturday August 25 th.:pepper:

Start time 9:00 AM

2-3 pulls for 60.00
Owner can drive his own car.
Also if we have time John will set aside tunning time.
We need to have 10 to 18 cars.

So far we have:
1- Shznit - 04 Cobra
2- 352 ford - 94 Cobra
3- 99 GT tony - 06 Roush
4- Oxford Snake - 03 Cobra
5- Bighuge - 03 Cobra
6- Painintheass - 03 Cobra?
7- Saleen09 - 03 Cobra - TENTATIVE
9- Coolguy10786 - 96 Cobra - TENTATIVE
10- Lethal SSVT - 03 Cobra - TENTATIVE



This is the e-mail I recived from John today.

The 25th does work. I like to get at least 10 cars and as many as 18.
The cost is 60 for 2-3 pulls per car with wide band. The owner does
normall drive the car on the dyno. If we have time we can allow some
tuning time for those who can.
 

saleen09

Slow A$$ Kenne Bell Cobra
Established Member
Joined
Aug 26, 2004
Messages
2,041
Location
Seattle, Wa
Since I want to do some tuning myself, could I stay near the end of the pack to make sure I have some time between runs to do so?

I need time to make changes, not just money shot dyno sheets. :)

What kind of dyno is it?
 

painintheass

New Member
Established Member
Joined
Mar 11, 2006
Messages
344
Location
WA
Please put me down as TENTATIVE for a tune on my 03 Cobra, since my wedding is the week after. Anything can happen, hee hee. How much is the cost for a tune please. :)

Thanks a bunch :)
 
Last edited:

BigHuge

Big Huge SVT Poster
Established Member
Joined
May 4, 2007
Messages
149
Location
Marysville, Wa
I know a tune is not cheap, around 400.00 dollars if John is doing your tune. And he has your car for must of the day. Now if you buy your own tuner like a SCT or Predator then you can do your own tune. And I know that Oxford Snake knows a little about the SVT tuner. Any input Oxford Snake?
 

2bfeard

New Member
Established Member
Joined
Mar 26, 2006
Messages
117
Location
Around or near a race track!!!
I'll bring my 93 Cobra with the 101mm Turbo on it!!!

Does anybody know what size the drum is on the dyno? I've tried to put down a number on a couple chassis dyno's and have not had very good luck, too much tire spinning. My car made just under 1400hp with a 88mm turbo, buy I have just upgraded to a 101mm, any details would be nice, thanks Gregg
 

Users who are viewing this thread



Top