dyno sheet

[assasinator]

here is the run i just did. mufflers, off road x and your tune.

are the A/F where they need to be for a coyote. im good with 13:1, but 12.5:1 is a tad safer.

 

[Carbd86GT]

Power looks good, but I will have to get with Lund to see what he says about the AFR. For a N/A car, that AFR is good but I'll ask Jon for his impression.

 

[Carbd86GT]

Spoke with Jon, he said that if the dyno operator is using a tail pipe o2 sensor, it's going to show leaner than normal because he tunes off of the factory wideband o2's located much further up stream. To check the true AFR, you will need to data log with the X3 and read the factory o2's. Hope that helps.

Thanks.

 

[assasinator]

i did datalog the O2's. ill download it and send it in the next few days.


BTW, guys i am so glad i chose lethal for everything. i cant say how good the tune is. its awesome. everything about it is perfect. dunno what happened initially, but its never acted badly since. and you see the power is good. im gonna dyno it one more time to see what the airraid did.