easiest way to go dual FPDM ?

[68_GT]

For my twin GT pumps...my car has been fine so far on the stocker, but...

does this mean to go with 2 stock FPDM's ? how do you wire it up ?

 

[TwinTurbo4vGT]

lethal performance sells the wiring kit.

 

[SUPERSEXY32V]

lethal performance sells the wiring kit.

+1 get the kit. Lethal has a good one. There is a write up on making your own but I opted for the kit with my setup and I am happy. installation was a breeze

 

[68_GT]

cool thanks guys, I guess it includes a stock FPDM ?

 

[Fat-cat]

Yup it should if not go to your local wrecker and yank one out of any v6 or Gt they are all the same.

 

[68_GT]

Yup it should if not go to your local wrecker and yank one out of any v6 or Gt they are all the same.

nice

all years the same ? 95-04 ??

 

[04Sonic]

Dual FPDM's wired seperate from the battery back split at the pumps so per pump has its own FPDM. You can just ad one FPDM stocker and have two....

 

[black03]

cool thanks guys, I guess it includes a stock FPDM ?

Our kit comes with 1 new stock FPDM, Dual FPDM wire harness and the wire upgrade kit which powers the FPDM's off of the 12v battery.

You would use your current FPDM as the additional one needed for the dual setup.

Hope that helps.

Jared

 

[FlaSeaDude]

Our kit comes with 1 new stock FPDM, Dual FPDM wire harness and the wire upgrade kit which powers the FPDM's off of the 12v battery.

You would use your current FPDM as the additional one needed for the dual setup.

Hope that helps.

Jared

This is the setup you need FTW...:rockon:

 

[stagedz]

Just go MDM and call it a day ;-D j/k of course...but I did go that route.